This thesis was developed in the field of masonry structures consolidation. The general objective of the thesis consists in the identification and formalization of appropriate analytical tools for sizing and testing metal rods. The first part of the work is devoted to an in-depth critical review of scientific literature about the state-of-the-art methods in this field. The core of the thesis consists in the development of a comprehensive method for the evaluation of the last resistant capacity of the metal rod system, which is composed by the rod, the retaining plate and the portion of the masonry that is subjected to the pressure caused by the retaining plate. The novel approach here proposed overcomes the drawbacks highlighted in the literature review. Finally, the thesis proposes an overview of practical approaches for design and construction of metal rod system in the following specific cases: (1) to increase the resistance of mutual chained walls and (2) to counterpoise the horizontal thrust of arches and vaults.
Questa tesi si sviluppa nell’ambito del consolidamento delle strutture murarie. L’obiettivo generale del documento è quello di individuare e proporre i procedimenti analitici necessari al dimensionamento e alla verifica dei tiranti metallici, al fine di supportare la pratica del consolidamento edilizio. La prima parte del lavoro svolto, consiste nella revisione della letteratura scientifica e mette in luce la povertà degli strumenti e dei modelli analitici disponibili su questo argomento. Per questa ragione la tesi fondamentalmente fornisce un’ampia trattazione riguardo la valutazione della capacità resistente ultima del “sistema” catena, intendendo quest’ultimo come l’insieme della barra, del capochiave e della zona di muratura investita dalla pressione di quest’ultima. Per arrivare a questo risultato si prende in considerazione criticamente quanto proposto dalla letteratura scientifica e se ne propongono radicali migliorie. A compendio di quanto ora descritto, nella tesi viene proposta una panoramica delle modalità di messa in opera e progetto relative a (1) applicazioni necessarie al mutuo incatenamento dei pannelli al fine di permettere il comportamento scatolare dell’edificio; e (2) applicazioni necessarie a controbilanciare le azioni orizzontali prodotte da strutture spingenti.
Il consolidamento delle strutture murarie mediante l'uso di catene metalliche
ROCCO, MARCO
2013/2014
Abstract
This thesis was developed in the field of masonry structures consolidation. The general objective of the thesis consists in the identification and formalization of appropriate analytical tools for sizing and testing metal rods. The first part of the work is devoted to an in-depth critical review of scientific literature about the state-of-the-art methods in this field. The core of the thesis consists in the development of a comprehensive method for the evaluation of the last resistant capacity of the metal rod system, which is composed by the rod, the retaining plate and the portion of the masonry that is subjected to the pressure caused by the retaining plate. The novel approach here proposed overcomes the drawbacks highlighted in the literature review. Finally, the thesis proposes an overview of practical approaches for design and construction of metal rod system in the following specific cases: (1) to increase the resistance of mutual chained walls and (2) to counterpoise the horizontal thrust of arches and vaults.File | Dimensione | Formato | |
---|---|---|---|
2015_04_Rocco.pdf
accessibile in internet per tutti
Descrizione: Testo della tesi
Dimensione
11.37 MB
Formato
Adobe PDF
|
11.37 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/107543