With eBridge project, I tried to create a biomedical device that would allow tetraplegics patients with spinal cord injury of C5 / C6 level, to be able to recover the use of the hand in a functional level, through the use of functional electrical stimulation . This practice is widely used in rehabilitation, in the major Italian centers. The principle of operation of the stimulation, taken into consideration in this thesis, is based on the use of the EMG signal from the non-injured muscles, which is read and converted into an electrical charge proportional to the force required to be able to grasp objects. From this point, the idea was born to create a support for supporting the electronics and the various electrodes to allow the upper limb stimulation. So I tried to be able to allow the individual to be able to regain possession of their autonomy in daily life, through the creation of a discreet, lightweight and it was not synonymous of disability for the patient.
Con il progetto EBridge, si è cercato di realizzare un dispositivo biomedicale, che permettesse ai pazienti tetraplegici, con lesione spinale di livello C5/C6, di poter recuperare l’uso della mano a un livello funzionale, attraverso l’impiego della stimolazione elettrica funzionale. Tale pratica è ampiamente usata in ambito riabilitativo, nei maggiori centri italiani. Il principio di funzionamento della stimolazione, presa in esame in questa tesi, si basa sull’uso del segnale EMG proveniente dai muscoli non lesionati, il quale viene letto e convertito in una scarica elettrica proporzionale alla forza necessaria per poter afferrare gli oggetti. Da tale aspetto, è nata l’idea di creare un supporto per supportare l’elettronica e i vari elettrodi per permettere la stimolazione dell’arto superiore. Quindi si è cercato di poter permettere all’individuo di potersi riappropriare della propria autonomia nella vita quotidiana, attraverso la realizzazione di un prodotto discreto, leggero e che non fosse sinonimo di disabilità per il paziente.
EBridge. Wearable per il recupero della mano funzionale con stimolazione elettrica per i casi di tetraplegia
CURRÒ, GIUSEPPE
2014/2015
Abstract
With eBridge project, I tried to create a biomedical device that would allow tetraplegics patients with spinal cord injury of C5 / C6 level, to be able to recover the use of the hand in a functional level, through the use of functional electrical stimulation . This practice is widely used in rehabilitation, in the major Italian centers. The principle of operation of the stimulation, taken into consideration in this thesis, is based on the use of the EMG signal from the non-injured muscles, which is read and converted into an electrical charge proportional to the force required to be able to grasp objects. From this point, the idea was born to create a support for supporting the electronics and the various electrodes to allow the upper limb stimulation. So I tried to be able to allow the individual to be able to regain possession of their autonomy in daily life, through the creation of a discreet, lightweight and it was not synonymous of disability for the patient.File | Dimensione | Formato | |
---|---|---|---|
Tesi Giuseppe Currò 814637-EBridge.pdf
solo utenti autorizzati dal 09/04/2017
Descrizione: Tesi di Laurea Magistrale EBridge
Dimensione
76.15 MB
Formato
Adobe PDF
|
76.15 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/122041