In the present scenario of ever-increasing world electric power demand with increased attention to environmental issues, Ocean Thermal Energy Conversion (OTEC) plants, because of their enormous potential, are gaining interest. In the present work, a techno-economic analysis of closed OTEC (CC-OTEC) cycles for electric power production is conducted. The effect of working fluid selection and number of evaporation levels from the techno-economic point of view are observed with simplified numerical models. A more detailed analysis of the single level power plant with the selected working fluid is also reported. Sizing of heat exchangers in the configuration found by this detailed analysis is conducted and capital cost estimation for the power plant has been assessed. With the introduction of simplifying assumptions on electric energy produced by the plant, the levelized cost of energy (LCOE) is finally calculated.
Nell’odierno scenario di continua crescita della domanda elettrica mondiale e di una maggiore sensibilità per le problematiche ambientali, gli impianti che sfruttano la Ocean Thermal Energy Conversion (OTEC) per la produzione di potenza, a causa del loro enorme potenziale, stanno guadagnando un crescente interesse. In questo lavoro è stata effettuata un’analisi tecnico-economica di impianti OTEC a ciclo chiuso (CC-OTEC) per la produzione di energia elettrica. L’effetto della scelta del fluido di lavoro e del numero di livelli di evaporazione dal punto di vista tecnico-economico sono stati osservati mediante l’uso di modelli semplificati dell’impianto. Un’analisi più dettagliata di un impianto a un singolo livello con il fluido di lavoro migliore selezionato precedentemente è stata poi effettuata. In seguito, per la soluzione individuata da questa ultima analisi dettagliata è stato effettuato il dimensionamento degli scambiatori e una stima dei costi d’impianto. Il levelized cost of energy (LCOE) per l’impianto ottenuto è stato calcolato tramite l’introduzione di ipotesi semplificative.
Techno-economic analysis of closed OTEC cycles for power generation
BERNARDONI, CHRISTIAN
2015/2016
Abstract
In the present scenario of ever-increasing world electric power demand with increased attention to environmental issues, Ocean Thermal Energy Conversion (OTEC) plants, because of their enormous potential, are gaining interest. In the present work, a techno-economic analysis of closed OTEC (CC-OTEC) cycles for electric power production is conducted. The effect of working fluid selection and number of evaporation levels from the techno-economic point of view are observed with simplified numerical models. A more detailed analysis of the single level power plant with the selected working fluid is also reported. Sizing of heat exchangers in the configuration found by this detailed analysis is conducted and capital cost estimation for the power plant has been assessed. With the introduction of simplifying assumptions on electric energy produced by the plant, the levelized cost of energy (LCOE) is finally calculated.File | Dimensione | Formato | |
---|---|---|---|
2016_09_Bernardoni.pdf
accessibile in internet per tutti
Descrizione: Testo della tesi
Dimensione
4.95 MB
Formato
Adobe PDF
|
4.95 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/124361