The objective of our thesis is to model a flexographic printing machine with four modules, in order to manage three basic problems: the first is the control and correct management of every single printing machine so that each one can correctly reply to the inputs of the operator and to what the printing process requires on a whole. The second, is the coordination and correct management of the printing process and the alignment of the various printing groups in order to have a clear print of all the colors. The last problem has to do with the web tension control of the paper, in order to avoid a tear in the material. We have also proceeded to do an initial fault detection analysis, creating a controller that detects the most basic faults and allows the operator to act on the single machine, on which the fault was created, in order to avoid a long and futile blind search on the whole implant in search of the problem.
L’obiettivo della nostra tesi è modellizzare una macchina flessografica con quattro gruppi stampa in modo da poter gestire tre problematiche basilari: la prima è il controllo e la corretta gestione di ogni singola macchina da stampa in modo che questa possa rispondere correttamente agli input dell’operatore e a quanto viene richiesto dal processo di stampa nella sua totalità. La seconda, è il coordinamento e la corretta gestione del processo di stampa e l’allineamento dei vari gruppi stampa in modo da avere una stampa nitida di tutti i colori. L’ultima problematica riguarda il corretto tensionamento della carta, per potere evitare un’eventuale rottura della stessa. In aggiunta, abbiamo effettuato un primo lavoro di analisi dei guasti (FDI – fault detection isolation) realizzando un controllore che rileva i guasti più comuni e permette così all’operatore di andare ad agire sulla singola macchina, sulla quale si è generato l’errore, evitando una futile e dispendiosa ricerca alla cieca sull'intero impianto alla ricerca del problema.
Macchina da stampa flessografica : controllo ed analisi preliminare dei guasti
PENONI, STEFANIA;NATTA, ARMANDO
2015/2016
Abstract
The objective of our thesis is to model a flexographic printing machine with four modules, in order to manage three basic problems: the first is the control and correct management of every single printing machine so that each one can correctly reply to the inputs of the operator and to what the printing process requires on a whole. The second, is the coordination and correct management of the printing process and the alignment of the various printing groups in order to have a clear print of all the colors. The last problem has to do with the web tension control of the paper, in order to avoid a tear in the material. We have also proceeded to do an initial fault detection analysis, creating a controller that detects the most basic faults and allows the operator to act on the single machine, on which the fault was created, in order to avoid a long and futile blind search on the whole implant in search of the problem.File | Dimensione | Formato | |
---|---|---|---|
2017_04_NATTA_PENONI.pdf
non accessibile
Descrizione: Testo della tesi
Dimensione
7.63 MB
Formato
Adobe PDF
|
7.63 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/133093