Earthquakes are among the most destructive and disastrous events whereby the Nature can unleash its entire strength; their unpredictability in time and in space is the root cause not only of numerous victims, but also a substantial damage from an economic point of view and especially artistic. Particularly in Italy, where the historical and cultural heritage is among the richest in the world, the recent events of the catastrophic power of the earth are putting at risk what has been built over the millennia. The historic masonry buildings are the most important buildings to be protected because they represent the type of construction more present in our territory. Churches, in particular, are the highest testimony of the artistic and cultural value that history has left us. Only recently, however, detailed and extensive studies on seismic safety of these structures are increased. The study of the seismic response that a church can have is vital to establish subsequently the seismic risk and, therefore, the types of the possible intervention made to preserve the structures. This thesis aims to study what are the structural wackness of seven churches of the Italian territory. For this purpose, the software Abaqus, a finite element program, is used; three dimensional models of the seven churches are therefore studied through non-linear static and dynamic analysis. Different methods of retrofitting are also presented for two churches to underline how a structural rehabilitation study can improve the response to a seismic event
I terremoti sono tra gli eventi più distruttivi e disastrosi con cui la natura può sprigionare tutta la sua forza; la loro imprevedibilità nel tempo e nello spazio è la causa principale non solo di numerose vittime, ma anche di un ingente danno dal punto di vista economico e soprattutto artistico. In particolare nel nostro Paese, dove il patrimonio storico-culturale è tra i più ricchi di tutto il mondo, le recenti manifestazioni del potere catastrofico della terra stanno mettendo a rischio quanto è stato costruito nel corso dei millenni. Le costruzioni storiche in muratura rappresentano gli edifici più importanti da proteggere poiché rappresentano la tipologia costruttiva più presente nel nostro territorio. Le chiese, in particolare, costituiscono la più alta testimonianza del valore artistico e culturale che la Storia ci ha lasciato. Soltanto recentemente, tuttavia, si sono aperte le porte verso ricerche sempre più approfondite e dettagliate sulla sicurezza sismica di tali opere. Lo studio quindi della risposta sismica che una chiesa può avere è di vitale importanza al fine di stabilire, successivamente, il rischio sismico e, quindi, le tipologie di intervento possibili al fine di salvaguardare la struttura. Tale elaborato si pone quindi l’obiettivo di studiare quelle che sono le debolezze strutturali di sette chiese del territorio italiano. A tal fine si ricorre quindi al software di calcolo agli elementi finiti Abaqus; i modelli tridimensionali delle sette chiese vengono pertanto studiati attraverso analisi dinamiche non lineari e statiche non lineari. Per quanto riguarda due delle sette chiese vengono inoltre presentate diverse metodologie di retrofitting al fine di sottolineare come uno studio di riabilitazione strutturale possa migliorare la risposta ad un evento sismico.
Valutazione della risposta sismica di chiese in muratura
BISERNI, ALBERTO
2015/2016
Abstract
Earthquakes are among the most destructive and disastrous events whereby the Nature can unleash its entire strength; their unpredictability in time and in space is the root cause not only of numerous victims, but also a substantial damage from an economic point of view and especially artistic. Particularly in Italy, where the historical and cultural heritage is among the richest in the world, the recent events of the catastrophic power of the earth are putting at risk what has been built over the millennia. The historic masonry buildings are the most important buildings to be protected because they represent the type of construction more present in our territory. Churches, in particular, are the highest testimony of the artistic and cultural value that history has left us. Only recently, however, detailed and extensive studies on seismic safety of these structures are increased. The study of the seismic response that a church can have is vital to establish subsequently the seismic risk and, therefore, the types of the possible intervention made to preserve the structures. This thesis aims to study what are the structural wackness of seven churches of the Italian territory. For this purpose, the software Abaqus, a finite element program, is used; three dimensional models of the seven churches are therefore studied through non-linear static and dynamic analysis. Different methods of retrofitting are also presented for two churches to underline how a structural rehabilitation study can improve the response to a seismic eventFile | Dimensione | Formato | |
---|---|---|---|
2017_4_Biserni.pdf
non accessibile
Dimensione
43.46 MB
Formato
Adobe PDF
|
43.46 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/133550