After having introduced the “overhead contact line system” (talking about the principal components, the total loads evaluation and the OLE design process followed in Italy), this thesis talks about the SWs owned by Alpiq EnerTrans S.p.A. They have undergone a full revisioning, validation and upgrade process, since in the meanwhile they have become obsolete and current national and international regulations have changed. For this reason, this work also explains the goals pursued, the approaches followed and the difficulties encountered. In the end, it has been discussed the possible future scenario concerning the use of these SWs in the OLE design process.
Dopo aver fatto un inquadramento relativo alla disciplina "linea di contatto” nel quale si sono introdotte le componenti fondamentali, il calcolo delle azioni per la verifica dei pali ed il processo di progettazione seguito in questo settore, si sono descritti i SW di proprietà di Alpiq EnerTrans S.p.A. utilizzati nella progettazione di questo componente del sistema ferro-tramviario. Essi sono stati sottoposti ad un processo di revisione, validazione ed upgrade a causa della modifica normativa, dell’intervenuta obsolescenza e delle mutate esigenze progettuali: nella tesi sono stati descritti gli obiettivi da perseguire, gli approcci seguiti e le difficoltà sopraggiunte. Infine sono stati presentati gli scenari futuri riguardanti l’uso di questi programmi all’interno del processo di progettazione.
Analisi e upgrade di un set di software specialistici per la tecnologia linea di contatto
CASTORE, ANTONIO
2016/2017
Abstract
After having introduced the “overhead contact line system” (talking about the principal components, the total loads evaluation and the OLE design process followed in Italy), this thesis talks about the SWs owned by Alpiq EnerTrans S.p.A. They have undergone a full revisioning, validation and upgrade process, since in the meanwhile they have become obsolete and current national and international regulations have changed. For this reason, this work also explains the goals pursued, the approaches followed and the difficulties encountered. In the end, it has been discussed the possible future scenario concerning the use of these SWs in the OLE design process.File | Dimensione | Formato | |
---|---|---|---|
2017_09_Castore.pdf
non accessibile
Descrizione: Testo della tesi
Dimensione
11.83 MB
Formato
Adobe PDF
|
11.83 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/136719