This paper’s purpose is to describe the energy renovation process of a 1920’s building in Carnate (MB), which will be a health centre, specifying the calculation’s method and the parameters used in the plant design. After a short recap of the current Italian and European legislation, the characteristic of the building and the climatic trends of the place will be described: this information will be the basis for the heating and cooling load’s calculation. Then, we’ll proceed with the plant design, including the sizing of all its elements, from the power station to every fan coil units inside the building. Finally the energy needs evaluated through a dynamic simulation by mean of EnergyPlus engine are introduced and discussed, resulting in some interesting thoughts about HVAC Engineering in 2018.
L’elaborato ha come obiettivo la descrizione del processo di riqualificazione energetica di un’edifico di inizio ‘900, sito a Carnate (MB) da adibire ad attività poliambulatoriale, indicando le metodologie di calcolo seguite nonché i criteri di scelta delle soluzioni impiantistiche adottate. Dopo una sintesi dei requisiti normativi, vengono presentate le caratteristiche architettoniche dell’edificio e le condizioni climatiche della località; a partire da queste informazioni di ricavano i carichi da soddisfare tramite l’impianto a servizio dell’edificio. Successivamente si procede alla selezione della soluzione impiantistica ed al dimensionamento dei suoi componenti, a partire dalla centrale termica fino ai singoli ambienti. Infine vengono riportati e analizzati i risultati del calcolo dei fabbisogni energetici, effettuato mediante simulazione dinamica con il motore EnergyPlus, ricavando alcune considerazioni importanti sulla progettazione termotecnica nel 2018.
Progettazione degli impianti meccanici a servizio di uno studio medico
DELUIGI, ANDREA
2017/2018
Abstract
This paper’s purpose is to describe the energy renovation process of a 1920’s building in Carnate (MB), which will be a health centre, specifying the calculation’s method and the parameters used in the plant design. After a short recap of the current Italian and European legislation, the characteristic of the building and the climatic trends of the place will be described: this information will be the basis for the heating and cooling load’s calculation. Then, we’ll proceed with the plant design, including the sizing of all its elements, from the power station to every fan coil units inside the building. Finally the energy needs evaluated through a dynamic simulation by mean of EnergyPlus engine are introduced and discussed, resulting in some interesting thoughts about HVAC Engineering in 2018.File | Dimensione | Formato | |
---|---|---|---|
2018_07_Deluigi.pdf
non accessibile
Descrizione: Testo della tesi
Dimensione
5.51 MB
Formato
Adobe PDF
|
5.51 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/141495