Validation of the Finite Element model of a human shoulder with a reverse implant compared to an experimental one performed in the laboratory. It was carried out in collaboration with BEAMS, a research laboratory at the ULB (Universitè Libre de Bruxelles) and with the IORT, Institute for Orthopedic Research and Training of the University of Leuven. Study of the sensitivity of the numerical model to understand how and how much each parameter was able to influence the results.
Validazione del modello ad Elementi Finiti di una spalla umana con impianto di protesi inversa rispetto ad uno sperimentale svolto in laboratorio. Esso e’ stato realizzato in collaborazione con il BEAMS, laboratorio di ricerca presso la ULB (Universitè Libre de Bruxelles) e con lo IORT, Institute for Orthopaedic Research and Training dell’universita di Leuven. Studio della sensibilita del modello numerico per comprendere come e quanto ciascun parametro fosse in grado di influenzare i risultati.
Validation of a finite element model of a human shoulder with a reverse implant based on experimental data
PETRUCCI, MAILA
2018/2019
Abstract
Validation of the Finite Element model of a human shoulder with a reverse implant compared to an experimental one performed in the laboratory. It was carried out in collaboration with BEAMS, a research laboratory at the ULB (Universitè Libre de Bruxelles) and with the IORT, Institute for Orthopedic Research and Training of the University of Leuven. Study of the sensitivity of the numerical model to understand how and how much each parameter was able to influence the results.File | Dimensione | Formato | |
---|---|---|---|
Thesis_Petrucci_2019.pdf
accessibile in internet solo dagli utenti autorizzati
Descrizione: Testo della tesi
Dimensione
4.74 MB
Formato
Adobe PDF
|
4.74 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/149070