The management of pressures in the civil sector is still regulated by valves called pressure reducing valves (PRVs), which allow to optimize the system and provide an efficient service. The Green Valve is an innovative control valve that is able to recover some of the energy dissipated in the flow regulation process, thanks to a turbine inside it. The work carried out in this thesis was to test various Green Valve Systems (GVS – Green Valve Systems) to identify the best solution to install on the network; the part of the experimental tests I carried out focused on the study of the signal of the pressure sensors on the valve, the use of the valve as a flow meter, and the energy recovery. In addition, a PRV was also tested in order to compare it with the GVS system, assessing its operating limits and key features. The Green Valve system I tested in this paper was finally successfully set up on a network in the town of Nozza di Vestone in the province of Brescia.

La gestione delle pressioni in ambito civile è tutt’ora regolata da valvole apposite dette appunto valvole di riduzione della pressione (PRV – Pressure Reducing Valves), che permettono di ottimizzare l’impianto e fornire un servizio efficiente. La Green Valve è un’innovativa valvola di regolazione che è in grado di recuperare parte dell’energia dissipata nel processo di regolazione del flusso, grazie ad una turbina presente al suo interno. Il lavoro svolto in questa tesi è stato quello di testare vari sistemi Green Valve (GVS – Green Valve Systems) per individuare la soluzione migliore da istallare in rete; la parte di prove sperimentali da me svolte sono state focalizzate sullo studio del segnale dei sensori di pressione su valvola, sull’utilizzo della valvola come flussimetro, e sul recupero energetico. Inoltre, è stata testata anche una PRV in modo da effettuarne un confronto con il sistema GVS, valutandone i limiti di funzionamento e le caratteristiche principali. Il sistema Green Valve da me testato in questo elaborato è stato infine istallato con successo su un acquedotto nel paese di Nozza di Vestone in provincia di Brescia.

Analisi sperimentale di prototipi green valve system

BENZI, STEFANO
2018/2019

Abstract

The management of pressures in the civil sector is still regulated by valves called pressure reducing valves (PRVs), which allow to optimize the system and provide an efficient service. The Green Valve is an innovative control valve that is able to recover some of the energy dissipated in the flow regulation process, thanks to a turbine inside it. The work carried out in this thesis was to test various Green Valve Systems (GVS – Green Valve Systems) to identify the best solution to install on the network; the part of the experimental tests I carried out focused on the study of the signal of the pressure sensors on the valve, the use of the valve as a flow meter, and the energy recovery. In addition, a PRV was also tested in order to compare it with the GVS system, assessing its operating limits and key features. The Green Valve system I tested in this paper was finally successfully set up on a network in the town of Nozza di Vestone in the province of Brescia.
FERRARESE, GIACOMO
ING I - Scuola di Ingegneria Civile, Ambientale e Territoriale
18-dic-2019
2018/2019
La gestione delle pressioni in ambito civile è tutt’ora regolata da valvole apposite dette appunto valvole di riduzione della pressione (PRV – Pressure Reducing Valves), che permettono di ottimizzare l’impianto e fornire un servizio efficiente. La Green Valve è un’innovativa valvola di regolazione che è in grado di recuperare parte dell’energia dissipata nel processo di regolazione del flusso, grazie ad una turbina presente al suo interno. Il lavoro svolto in questa tesi è stato quello di testare vari sistemi Green Valve (GVS – Green Valve Systems) per individuare la soluzione migliore da istallare in rete; la parte di prove sperimentali da me svolte sono state focalizzate sullo studio del segnale dei sensori di pressione su valvola, sull’utilizzo della valvola come flussimetro, e sul recupero energetico. Inoltre, è stata testata anche una PRV in modo da effettuarne un confronto con il sistema GVS, valutandone i limiti di funzionamento e le caratteristiche principali. Il sistema Green Valve da me testato in questo elaborato è stato infine istallato con successo su un acquedotto nel paese di Nozza di Vestone in provincia di Brescia.
Tesi di laurea Magistrale
File allegati
File Dimensione Formato  
2019_12_Benzi.pdf

non accessibile

Descrizione: Testo della tesi
Dimensione 11.18 MB
Formato Adobe PDF
11.18 MB Adobe PDF   Visualizza/Apri

I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10589/150905