This work deals with the thesis activity carried out in the Research & Development deparment at Dallara Automobili concerning the improvement of a particular device called “Poster Rig”. After an introductory part to put into context the work in the company environment, the test bench is introduced and all its working duties are explained and described. Therefore, after description of the aim of improve the forces transmission at ground by the tyres by means of an update at the wheelpans, an analysis of the state of art is done. Then the paper describes all the activities performed for the engineering and the design of the device through experimental tests, FEM and CAD analysis. Finally the system has been verified from the mechanical and structural point of view in order to prepare a possible production and involvement.
In questo lavoro si presenta l’attività di tesi svolta nel reparto R&D della azienda Dallara Automobili riguardante l’aggiornamento di un particolare banco prova chiamato “Poster Rig”. Dopo una parte introduttiva che contestualizza il lavoro inserito nell’ambito aziendale, si è analizzato il banco prova nel suo stato attuale attraverso le sue potenzialità e ai suoi diversi utilizzi. A questo punto è poi stato descritto lo scopo del lavoro volto a modificare il dispositivo posto all’interfaccia fra banco prova e veicolo in modo da migliorare la trasmissione delle forze a terra. Dopo una rapida analisi dello stato dell’arte la trattazione parla del percorso intrapreso per la progettazione di un dispositivo completamente nuovo nel suo genere attraverso prove sperimentali, analisi FEM e l’ausilio del CAD. Infine il dispositivo è stato verificato dal punto di vista costruttivo e strutturale in previsione di una futura produzione.
Study and design of a special equipment for a four/seven poster rig test bench : enhancing and improvement of the transmission of forces at ground during the manoeuvres of pitch, roll and yaw
TREDOZI, TOMMASO
2018/2019
Abstract
This work deals with the thesis activity carried out in the Research & Development deparment at Dallara Automobili concerning the improvement of a particular device called “Poster Rig”. After an introductory part to put into context the work in the company environment, the test bench is introduced and all its working duties are explained and described. Therefore, after description of the aim of improve the forces transmission at ground by the tyres by means of an update at the wheelpans, an analysis of the state of art is done. Then the paper describes all the activities performed for the engineering and the design of the device through experimental tests, FEM and CAD analysis. Finally the system has been verified from the mechanical and structural point of view in order to prepare a possible production and involvement.File | Dimensione | Formato | |
---|---|---|---|
Tesi_Tredozi_2019_12_02.pdf
accessibile in internet per tutti
Descrizione: Tesi Tommaso Tredozi
Dimensione
9.58 MB
Formato
Adobe PDF
|
9.58 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/151488