An experimental investigation was carried out to study the aerodynamic performance of a typical UAV modified propeller. The propeller was modified to incorporate tubercles on the leading edge. The aerodynamic characteristics of two configurations: a baseline, without leading edge tubercles, and one with tubercles of constant wavelength and amplitude along the span were evaluated using propeller test rig.
Oggetto di questa tesi è lo studio, attraverso un approccio sperimentale, del comportamento di un elica modificata per drone. L'elica è stata modificata inserendo sul bordo d'entrata delle protuberanze. Sono state analizzate due configurazioni: una configurazione di riferimento, senza protuberanze, e una configurazione con protuberanze con lunghezza d'onda e ampiezza costanti lungo l'apertura, utilizzando un banco di prova.
Experimental investigation of performances of a sawtooth propeller
MONTANINI, FEDERICO
2018/2019
Abstract
An experimental investigation was carried out to study the aerodynamic performance of a typical UAV modified propeller. The propeller was modified to incorporate tubercles on the leading edge. The aerodynamic characteristics of two configurations: a baseline, without leading edge tubercles, and one with tubercles of constant wavelength and amplitude along the span were evaluated using propeller test rig.File | Dimensione | Formato | |
---|---|---|---|
Thesis Montanini.pdf
accessibile in internet solo dagli utenti autorizzati
Descrizione: Testo della tesi
Dimensione
30.21 MB
Formato
Adobe PDF
|
30.21 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/151670