The work has been carried out at Robert Bosch GmbH, at the division of "Corporate Research and Advance Engineering", in the CR/ARM department in Renningen. The following study aims at improving the current knowledge of the effects of the suspension components on the rheological properties of the pastes used for printing technologies. This is key to optimizing many industrial manufacturing processes. An improved knowledge and understanding of the correlation between components and process parameters also allows to produce more performing components. In different powder mixtures, with changing binder and solid content, the effect of particle interactions on the rheological properties has been studied. By using statistical data analysis, different Design of Experiments space designs have also been employed, in order to analyse the impact of the design on the accuracy of the corresponding results. These models improve the optimization process of pastes and emphasize the effect of the suspension components on the rheology of pastes.
Il lavoro è stato svolto presso l'azienda Robert Bosch GmbH, nella divisione di "Corporate Research and Advance Engineering", nel dipartimento CR/ARM a Renningen. Il seguente studio ha come obbiettivo il miglioramento della conoscenza dell'effetto dei componenti delle sospensioni sulle proprietà reologiche di paste usate per printing technologies. Ciò è di importanza fondamentale per l'ottimizzazione dei processi di produzione industriali. Una migliore conoscenza delle correlazioni tra componenti e parametri di processo permette anche lo sviluppo di componenti più performanti. In diverse miscele di polveri, con diversi contenuti solidi e di binder, l'effetto dell'interazione tra particelle sulle proprietà reologiche è stato studiato. Attraverso un' analisi statistica di dati, diversi Design of Experiments space designs sono stati utilizzati per analizzare l'impatto del design sull'accuratezza dei corrispondenti risultati. Questi modelli permettono un miglioramento del processo di ottimizzazione delle paste ed evidenziano gli effetti dei componenti delle sospensioni sul loro comportamento reologico.
Influence of powder and binder type on paste process parameters
TEDESI, MICHELE
2018/2019
Abstract
The work has been carried out at Robert Bosch GmbH, at the division of "Corporate Research and Advance Engineering", in the CR/ARM department in Renningen. The following study aims at improving the current knowledge of the effects of the suspension components on the rheological properties of the pastes used for printing technologies. This is key to optimizing many industrial manufacturing processes. An improved knowledge and understanding of the correlation between components and process parameters also allows to produce more performing components. In different powder mixtures, with changing binder and solid content, the effect of particle interactions on the rheological properties has been studied. By using statistical data analysis, different Design of Experiments space designs have also been employed, in order to analyse the impact of the design on the accuracy of the corresponding results. These models improve the optimization process of pastes and emphasize the effect of the suspension components on the rheology of pastes.File | Dimensione | Formato | |
---|---|---|---|
Tesi.pdf
non accessibile
Descrizione: Tesi Magistrale - Michele Tedesi
Dimensione
3.14 MB
Formato
Adobe PDF
|
3.14 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/153180