The core thema of the thesis is the design of an electric scooter for a sharing service with a swappable battery . The vehicle has been designed to meet the technical requirements of the construction regulations for electric bikes, bicycles and electric scooters. The project output is the design of a vehicle with the chassis designed to be rotomolded. The first part of the thesis is composed by the research of an alternative electric mobility, of sharing service, of products on the market and of sharing operators who now operate with their services. the project take in consideration the strategies of competitors, scenario and a pool of users which could use the vehicle design . The combination of knowledge obtained through research with the design constraints set in principle lays the foundations for the development of this product. Construction, management and functional issues are addressed in order to arrive at the end of the elaboration with an object ready to be prototyped and tailored to the needs of the service decided upstream of the project.
In questo progetto di tesi si affronta la tematica di progettazione di un monopattino elettrico per un servizio sharing con logica di batteria intercambiabile. Il veicolo è stato progettato per poter soddisfare i requisiti tecnici delle normative di costruzioni delle bici elettriche , delle biciclette e dei monopattini elettrici. L’output di progetto è il design di un veicolo con il telaio progettato per poter essere rotostampato. L’elaborato è composto da una parte di ricerca sulla mobilità elettrica alternativa , sullo sharing , sui prodotti presenti sul mercato e sugli operatori sharing che oggi operano con i propri servizi. In seguito alla ricerca di mercato per comprendere le strategie dei competitor si è stabilito uno scenario e un bacino di utenti su cui indirizzare la progettazione del veicolo. L’unione delle conoscenze ottenute tramite la ricerca con i vincoli progettuali fissati in principio pone le basi per lo sviluppo di questo prodotto. Si affrontano tematiche costruttive, gestionali e funzionali per arrivare a fine elaborato con un oggetto pronto per la prototipazione caratterizzato nei sui componenti e sviluppato su misura per le esigenze del servizio deciso a monte del progetto.
Eddy. Ricerca, ideazione e sviluppo di un monopattino elettrico per lo sharing con telaio rotostampato
GATTI, GIANMARCO
2018/2019
Abstract
The core thema of the thesis is the design of an electric scooter for a sharing service with a swappable battery . The vehicle has been designed to meet the technical requirements of the construction regulations for electric bikes, bicycles and electric scooters. The project output is the design of a vehicle with the chassis designed to be rotomolded. The first part of the thesis is composed by the research of an alternative electric mobility, of sharing service, of products on the market and of sharing operators who now operate with their services. the project take in consideration the strategies of competitors, scenario and a pool of users which could use the vehicle design . The combination of knowledge obtained through research with the design constraints set in principle lays the foundations for the development of this product. Construction, management and functional issues are addressed in order to arrive at the end of the elaboration with an object ready to be prototyped and tailored to the needs of the service decided upstream of the project.File | Dimensione | Formato | |
---|---|---|---|
Eddy_Gianmarco_Gatti.pdf
non accessibile
Descrizione: thesis_file
Dimensione
14.5 MB
Formato
Adobe PDF
|
14.5 MB | Adobe PDF | Visualizza/Apri |
antropometric_a1.pdf
non accessibile
Descrizione: technical_drawings
Dimensione
2.33 MB
Formato
Adobe PDF
|
2.33 MB | Adobe PDF | Visualizza/Apri |
battery_assembly.pdf
non accessibile
Descrizione: technical_drawings
Dimensione
371.44 kB
Formato
Adobe PDF
|
371.44 kB | Adobe PDF | Visualizza/Apri |
BOM.pdf
non accessibile
Descrizione: technical_drawings
Dimensione
368.73 kB
Formato
Adobe PDF
|
368.73 kB | Adobe PDF | Visualizza/Apri |
general_assembly.pdf
non accessibile
Descrizione: technical_drawings
Dimensione
4.57 MB
Formato
Adobe PDF
|
4.57 MB | Adobe PDF | Visualizza/Apri |
push_arm__back_part.pdf
non accessibile
Descrizione: technical_drawings
Dimensione
247.94 kB
Formato
Adobe PDF
|
247.94 kB | Adobe PDF | Visualizza/Apri |
push_arm__bracetto.pdf
non accessibile
Descrizione: technical_drawings
Dimensione
243.45 kB
Formato
Adobe PDF
|
243.45 kB | Adobe PDF | Visualizza/Apri |
push_arm__upper_part.pdf
non accessibile
Descrizione: technical_drawings
Dimensione
228.42 kB
Formato
Adobe PDF
|
228.42 kB | Adobe PDF | Visualizza/Apri |
section_general_assembly.pdf
non accessibile
Descrizione: technical_drawings
Dimensione
2.55 MB
Formato
Adobe PDF
|
2.55 MB | Adobe PDF | Visualizza/Apri |
TELAIO.pdf
non accessibile
Descrizione: technical_drawings
Dimensione
1.13 MB
Formato
Adobe PDF
|
1.13 MB | Adobe PDF | Visualizza/Apri |
wheel_back.pdf
non accessibile
Descrizione: technical_drawings
Dimensione
1.46 MB
Formato
Adobe PDF
|
1.46 MB | Adobe PDF | Visualizza/Apri |
wheel_front.pdf
non accessibile
Descrizione: technical_drawings
Dimensione
1.44 MB
Formato
Adobe PDF
|
1.44 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/165441