This master thesis has been realized in collaboration with ABB, Measure ment & Analytics division located in Ossuccio (CO). The objective of the thesis is the implementation of the IO-Link standard on the communication board for a new series of pressure transmitters that are going to be released at the end of the year 2021. I was part of the R&D team and I have worked on the Hardware and the Firmware development.
Questa tesi magistrale è stata realizzata in collaborazione con ABB, Measurement & Analytics nella sede di Ossuccio (CO). L'obiettivo della tesi è l'implementazione dello standar IO-Link sulla Communication Board per una nuova serie di trasmettitori di pressione che verrà rilasciata alla fine del 2021. Ho fatto parte del reparto R&D e ho lavorato sulla parte Hardware e Firmwaare.
Hardware and firmware development of a communication board with IO-Link for pressure transmitters
Kotsaba, Mykhaylo
2020/2021
Abstract
This master thesis has been realized in collaboration with ABB, Measure ment & Analytics division located in Ossuccio (CO). The objective of the thesis is the implementation of the IO-Link standard on the communication board for a new series of pressure transmitters that are going to be released at the end of the year 2021. I was part of the R&D team and I have worked on the Hardware and the Firmware development.File | Dimensione | Formato | |
---|---|---|---|
2021_4_kotsaba.pdf
accessibile in internet solo dagli utenti autorizzati
Descrizione: Testo della Tesi
Dimensione
2.55 MB
Formato
Adobe PDF
|
2.55 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/173682