Design, implementation and validation of a testing-setup board for ADC-PLL systems able to provide not only twelve high-resolution (around 2mV) low-noise (around 2nV/√Hz) voltage outputs, but also the possibility to digitally tune them (from a PC through an Arduino board) to have a value from 0V to 3.3V, as well as able to allow the user to turn on/off the outputs and measure their voltage and current from the PC through the Arduino board.

Progettazione, implementazione e validazione di una scheda per testare sistemi ADC-PLL capace di non soltanto fornire dodici uscite di tensione ad alta risoluzione (circa 2mV) ed a basso rumore (circa 2nV/√Hz), ma anche la possibilità di aggiustarle digitalmente (da un PC tramite una scheda Arduino) per avere un valore da 0V a 3.3V; inoltre capace di consentire all'utente di accendere o spegnere le uscite e misurare la loro tensione e corrente dal PC tramite la scheda Arduino.

Design of testing-setup board for ADC-PLL systems

PARDO HERRERA, JOSE NÉSTOR
2020/2021

Abstract

Design, implementation and validation of a testing-setup board for ADC-PLL systems able to provide not only twelve high-resolution (around 2mV) low-noise (around 2nV/√Hz) voltage outputs, but also the possibility to digitally tune them (from a PC through an Arduino board) to have a value from 0V to 3.3V, as well as able to allow the user to turn on/off the outputs and measure their voltage and current from the PC through the Arduino board.
BERTULESSI, LUCA
ING - Scuola di Ingegneria Industriale e dell'Informazione
28-apr-2021
2020/2021
Progettazione, implementazione e validazione di una scheda per testare sistemi ADC-PLL capace di non soltanto fornire dodici uscite di tensione ad alta risoluzione (circa 2mV) ed a basso rumore (circa 2nV/√Hz), ma anche la possibilità di aggiustarle digitalmente (da un PC tramite una scheda Arduino) per avere un valore da 0V a 3.3V; inoltre capace di consentire all'utente di accendere o spegnere le uscite e misurare la loro tensione e corrente dal PC tramite la scheda Arduino.
File allegati
File Dimensione Formato  
ThesisDoc_JNPH.pdf

accessibile in internet solo dagli utenti autorizzati

Descrizione: Design of testing-setup board for ADC-PLL systems
Dimensione 15.72 MB
Formato Adobe PDF
15.72 MB Adobe PDF   Visualizza/Apri

I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/10589/174186