The idea of this thesis is to create a theoretical Decision Support System (DSS) where the user would have the ability to set values such as stiffness, strength, weight, IP protection, service temperature, accuracy, cost, porosity, etc., for a printable 3D object. Then, the platform, according to the imported data, will recommend a series of scored combinations of AM technology and AM material for 3D printing.
Vat Photopolymerization, Material Extrusion: Data collection through Tensile and Density testing to propose a Decision Support System for Additive Manufacturing.
Vat photopolymerization, material extrusion : data collection through tensile and density testing to propose a decision support system for additive manufacturing
DIMOPOULOS, ANTONIOS
2020/2021
Abstract
The idea of this thesis is to create a theoretical Decision Support System (DSS) where the user would have the ability to set values such as stiffness, strength, weight, IP protection, service temperature, accuracy, cost, porosity, etc., for a printable 3D object. Then, the platform, according to the imported data, will recommend a series of scored combinations of AM technology and AM material for 3D printing.File allegati
File | Dimensione | Formato | |
---|---|---|---|
Antonios_Dimopoulos_Thesis_2021.pdf
non accessibile
Descrizione: Antonios_Dimopoulos_Thesis_2021
Dimensione
11.67 MB
Formato
Adobe PDF
|
11.67 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
Utilizza questo identificativo per citare o creare un link a questo documento:
https://hdl.handle.net/10589/175275