Cost assessment is a fundamental activity in the operational life of any company. It is used from the drawing up of budgets to the evaluation of supply offers. In this thesis, carried out in collaboration with Leonardo Aircraft Division, an algorithm for predicting the costs of lamination tools was created after analysing their different manufacturing techniques and defining their most suitable uses. This algorithm, broken down per manufacturing technologies, is based on parametric estimation in order to require only a few input data related to the flying part to be produced. The creation of this cost assessment algorithm will allow Leonardo S.p.A. to reduce the time required for the cost evaluation of the aforementioned tools and to provide univocal results based on data historicity.
La valutazione dei costi è un’attività fondamentale nella vita operativa di qualsiasi realtà aziendale. Essa viene impiegata dalla stipulazione dei budget alla valutazione delle offerte di fornitura. In questo lavoro di tesi, svolto in collaborazione con Leonardo Divisione Velivoli, si è proceduto a realizzare un algoritmo di predizione dei costi delle attrezzature di laminazione dopo aver analizzato le loro diverse tecnologie realizzative e aver definito i loro impieghi più idonei. Tale algoritmo, scomposto per le diverse famiglie tecnologiche, è basato sulla preventivazione parametrica in modo da richiedere pochi dati di input relativi alla parte di volo che si intende produrre. La realizzazione di tale strumento di preventivazione permetterà a Leonardo S.p.A. di abbattere le tempistiche necessarie per la preventivazione degli attrezzi sopracitati e di fornire risultati univoci basati sulla storicità dei dati.
Algoritmo di Preventivazione Costi delle Attrezzature di Laminazione, analizzate nelle diverse Famiglie Tecnologiche
Del Torre, Riccardo
2021/2022
Abstract
Cost assessment is a fundamental activity in the operational life of any company. It is used from the drawing up of budgets to the evaluation of supply offers. In this thesis, carried out in collaboration with Leonardo Aircraft Division, an algorithm for predicting the costs of lamination tools was created after analysing their different manufacturing techniques and defining their most suitable uses. This algorithm, broken down per manufacturing technologies, is based on parametric estimation in order to require only a few input data related to the flying part to be produced. The creation of this cost assessment algorithm will allow Leonardo S.p.A. to reduce the time required for the cost evaluation of the aforementioned tools and to provide univocal results based on data historicity.File | Dimensione | Formato | |
---|---|---|---|
Tesi Riccardo Del Torre.pdf
non accessibile
Descrizione: Tesi
Dimensione
5.62 MB
Formato
Adobe PDF
|
5.62 MB | Adobe PDF | Visualizza/Apri |
Executive Riccardo Del Torre.pdf
non accessibile
Descrizione: Executive Summary
Dimensione
1.11 MB
Formato
Adobe PDF
|
1.11 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/197280