Prolonged exposure to high levels of industrial noise poses health and safety risks, making effective noise attenuation essential. While traditional passive noise control is effective at higher frequencies, it struggles to attenuate low-frequency noise without requiring impractically thick materials. This physical limitation motivates the use of Active Noise Control (ANC). However, ANC is not yet widespread across all industrial sectors and products, mainly due to the lack of affordable, high performance solutions. This trade-off is particularly evident in the case of controlling noise emitted from ventilated enclosures. To address this gap, this study presents the design, development, and validation of a sparsely actuated multi-channel ANC system. The research progressed from a well-studied benchmark duct setup to two industrial case studies: a server enclosure and a hybrid passive-active Aphonic Grid. Initial experiments confirmed that while a SISO system was effective in the duct (in the frequency range of 100-1000 Hz), it failed on the server enclosure due to a non-uniform phase distribution at the vent. To overcome this physical limitation, a sparsely actuated MIMO architecture was deployed, achieving spatial attenuation in the frequency range of 100–700 Hz. In the second application, a passive Aphonic Grid was first characterized in terms of Transmission Loss (TL) by mounting it on an Alpha Cabin aperture. The results showed strong high-frequency performance up to 14 dBA of attenuation, but significant drops at low frequencies (160 Hz octave band). Therefore, the embedded MIMO feedback controller was integrated with the minimum number of speakers that can handle phase differences across the aperture area in frequencies lower than 300 Hz. The results, assessed using local and global monitoring microphones, showed successful spatial noise reduction in the 160 Hz octave band. The findings demonstrate that by defining a frequency range of interest, it is possible to identify a minimum number of actuators capable of effectively attenuating enclosure-radiated noise.
L’esposizione prolungata a elevati livelli di rumore industriale comporta rischi per la salute e la sicurezza, rendendo essenziale un’attenuazione efficace del rumore. Sebbene il controllo passivo del rumore tradizionale sia efficace alle alte frequenze, fatica ad attenuare il rumore a bassa frequenza senza richiedere materiali di spessore impraticabile. Questo limite fisico motiva l’impiego dell’Active Noise Control (ANC). Tuttavia, l’ANC non è ancora diffuso in tutti i settori e prodotti industriali, principalmente per la mancanza di soluzioni accessibili e ad alte prestazioni. Questo compromesso è particolarmente evidente nel controllo del rumore irradiato da involucri ventilati. Per colmare questa lacuna, il presente studio presenta la progettazione, lo sviluppo e la validazione di un sistema ANC multicanale a bassa densità di attuazione. La ricerca si è sviluppata da un benchmark in condotto ben consolidato fino a due casi di studio industriali: un involucro per server e una Aphonic Grid ibrida passiva-attiva. Gli esperimenti iniziali hanno confermato che, sebbene un sistema SISO fosse efficace nel condotto nell’intervallo 100-1000 Hz, esso falliva nel caso dell’involucro del server a causa di una distribuzione di fase non uniforme all’apertura di ventilazione. Per superare questo limite fisico, è stata adottata un’architettura MIMO a bassa densità di attuazione, ottenendo attenuazione spaziale nell’intervallo 100-700 Hz. Nella seconda applicazione, una Aphonic Grid passiva è stata inizialmente caratterizzata in termini di Transmission Loss (TL) montandola sull’apertura di una Alpha Cabin. I risultati hanno mostrato elevate prestazioni alle alte frequenze, con attenuazioni fino a 14 dBA, ma cali significativi alle basse frequenze, in particolare nella banda di ottava a 160 Hz. Pertanto, il controllore MIMO embedded in retroazione è stato integrato con il numero minimo di altoparlanti necessario a gestire le differenze di fase sull’area dell’apertura per frequenze inferiori a 300 Hz. I risultati, valutati mediante microfoni di monitoraggio locali e globali, hanno mostrato un’efficace riduzione spaziale del rumore nella banda di ottava a 160 Hz. Tali risultati dimostrano che, definendo un intervallo di frequenza di interesse, è possibile individuare un numero minimo di attuatori in grado di attenuare efficacemente il rumore irradiato dall’involucro.
Sparsely actuated MIMO feedback active noise control for ventilated enclosures
Ghasemi, Mohsen
2025/2026
Abstract
Prolonged exposure to high levels of industrial noise poses health and safety risks, making effective noise attenuation essential. While traditional passive noise control is effective at higher frequencies, it struggles to attenuate low-frequency noise without requiring impractically thick materials. This physical limitation motivates the use of Active Noise Control (ANC). However, ANC is not yet widespread across all industrial sectors and products, mainly due to the lack of affordable, high performance solutions. This trade-off is particularly evident in the case of controlling noise emitted from ventilated enclosures. To address this gap, this study presents the design, development, and validation of a sparsely actuated multi-channel ANC system. The research progressed from a well-studied benchmark duct setup to two industrial case studies: a server enclosure and a hybrid passive-active Aphonic Grid. Initial experiments confirmed that while a SISO system was effective in the duct (in the frequency range of 100-1000 Hz), it failed on the server enclosure due to a non-uniform phase distribution at the vent. To overcome this physical limitation, a sparsely actuated MIMO architecture was deployed, achieving spatial attenuation in the frequency range of 100–700 Hz. In the second application, a passive Aphonic Grid was first characterized in terms of Transmission Loss (TL) by mounting it on an Alpha Cabin aperture. The results showed strong high-frequency performance up to 14 dBA of attenuation, but significant drops at low frequencies (160 Hz octave band). Therefore, the embedded MIMO feedback controller was integrated with the minimum number of speakers that can handle phase differences across the aperture area in frequencies lower than 300 Hz. The results, assessed using local and global monitoring microphones, showed successful spatial noise reduction in the 160 Hz octave band. The findings demonstrate that by defining a frequency range of interest, it is possible to identify a minimum number of actuators capable of effectively attenuating enclosure-radiated noise.| File | Dimensione | Formato | |
|---|---|---|---|
|
2026_07_Ghasemi_Thesis_01.pdf
non accessibile
Descrizione: Thesis Report
Dimensione
51.35 MB
Formato
Adobe PDF
|
51.35 MB | Adobe PDF | Visualizza/Apri |
|
2026_07_Ghasemi_Executive_Summary_02.pdf
non accessibile
Descrizione: Executive Summary
Dimensione
15.72 MB
Formato
Adobe PDF
|
15.72 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/260143