The natural inertia of contemporary power systems has been greatly diminished by the growing integration of power electronic based resources, making frequency stability a serious concern in converter dominated grids. By simulating synchronous generator behaviour and supplying synthetic inertia, High Voltage Direct Current (HVDC) systems with Grid Forming Inverter (GFMI) management can significantly contribute to grid dynamics. With an emphasis on the inverter side of the HVDC connection, and in accordance with CESI, this thesis explores grid forming control and synthetic inertia in HVDC applications. The control structure consists of an exterior Active Power Control (APC) loop based on a Virtual Synchronous Generator (VSG), an inner voltage and current loop, and a PI controller-based Reactive Power Control (RPC) loop. To examine the interaction between APC and RPC in both strong grid and weak grid scenarios, a small signal model is created. Grid impedance significantly influences the interaction between active and reactive power control, as demonstrated by the Relative Gain Array (RGA) approach and time domain responses. Weak grids result in more substantial coupling. The impact of synthetic inertia on grid frequency response after load disturbances is also assessed in this study. Lastly, the analytical results are validated using PSCAD simulations, which show the contribution of VSG based control to frequency support as well as the APC and RPC coupling under weak grid operation.
La naturale inerzia dei sistemi energetici contemporanei è stata notevolmente ridotta dalla crescente integrazione delle risorse basate sull’elettronica di potenza, rendendo la stabilità della frequenza una seria preoccupazione nelle reti dominate dai convertitori. Simulando il comportamento sincrono del generatore e fornendo l'inerzia sintetica, i sistemi in corrente continua ad alta tensione (HVDC) con gestione Grid Forming Inverter (GFMI) possono contribuire in modo significativo alla dinamica della rete. Con un'enfasi sul lato inverter della connessione HVDC, e in accordanze con CESI, questa tesi esplora il controllo della formazione della rete e l'inerzia sintetica nelle applicazioni HVDC. La struttura di controllo è costituita da un anello di controllo della potenza attiva (APC) esterno basato su un generatore sincrono virtuale (VSG), un anello di tensione e corrente interno e un anello di controllo della potenza reattiva (RPC) basato su controller PI. Per esaminare l'interazione tra APC e RPC sia negli scenari di rete forte che di rete debole, viene creato un modello di piccolo segnale. L'impedenza di rete influenza in modo significativo l'interazione tra il controllo della potenza attiva e reattiva, come dimostrato dall'approccio Relative Gain Array (RGA) e dalle risposte nel dominio del tempo. Le griglie deboli determinano un accoppiamento più sostanziale. In questo studio viene valutato anche l'impatto dell'inerzia sintetica sulla risposta in frequenza della rete dopo i disturbi del carico. Infine, i risultati analitici vengono convalidati utilizzando simulazioni PSCAD, che mostrano il contributo del controllo basato su VSG al supporto della frequenza nonché all’accoppiamento APC e RPC in condizioni di debole funzionamento della rete.
Synthetic inertia and grid forming inverters within HVDC applications
Badr, Ali
2025/2026
Abstract
The natural inertia of contemporary power systems has been greatly diminished by the growing integration of power electronic based resources, making frequency stability a serious concern in converter dominated grids. By simulating synchronous generator behaviour and supplying synthetic inertia, High Voltage Direct Current (HVDC) systems with Grid Forming Inverter (GFMI) management can significantly contribute to grid dynamics. With an emphasis on the inverter side of the HVDC connection, and in accordance with CESI, this thesis explores grid forming control and synthetic inertia in HVDC applications. The control structure consists of an exterior Active Power Control (APC) loop based on a Virtual Synchronous Generator (VSG), an inner voltage and current loop, and a PI controller-based Reactive Power Control (RPC) loop. To examine the interaction between APC and RPC in both strong grid and weak grid scenarios, a small signal model is created. Grid impedance significantly influences the interaction between active and reactive power control, as demonstrated by the Relative Gain Array (RGA) approach and time domain responses. Weak grids result in more substantial coupling. The impact of synthetic inertia on grid frequency response after load disturbances is also assessed in this study. Lastly, the analytical results are validated using PSCAD simulations, which show the contribution of VSG based control to frequency support as well as the APC and RPC coupling under weak grid operation.| File | Dimensione | Formato | |
|---|---|---|---|
|
2026_07_Badr.pdf
accessibile in internet solo dagli utenti autorizzati
Dimensione
8.11 MB
Formato
Adobe PDF
|
8.11 MB | Adobe PDF | Visualizza/Apri |
|
2026_07_Badr_Executive_Summary.pdf
accessibile in internet solo dagli utenti autorizzati
Dimensione
2.76 MB
Formato
Adobe PDF
|
2.76 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/260330