Saltwater intrusion in estuaries is a phenomenon of significant scientific and practical interest, as it can compromise water quality and affect agricultural, industrial, and civil activities. This issue is particularly relevant in the coastal watercourses of the Adriatic Sea, which are characterized by a micro tidal regime and low flow conditions that allows the upstream propagation of the salt wedge. The aim of this thesis is to develop and evaluate simplified tools for estimating saltwater intrusion through comparison with a three dimensional hydrodynamic model. To this end, a 3D numerical model of an idealized channel with a quasi prismatic geometry was developed and used as a numerical laboratory for investigating salinity transport processes. The model was calibrated through comparison with observed salinity data and measured saltwater intrusion lengths. Subsequently, a one dimensional model was implemented using the HEC-RAS software and calibrated against the results of the three dimensional model. Analytical and empirical formulations for estimating saltwater intrusion length were also calibrated, using the 3D model as a reference. The results demonstrate that the three dimensional model reproduces the physical process and that the simplified approaches provide reliable estimates of saltwater intrusion. Despite the uncertainties associated with modeling such a complex process, the developed tools can represent valuable support for operational applications and for water resources management in estuarine environments.
L'intrusione salina negli estuari costituisce un fenomeno di rilevante interesse scientifico e applicativo, poiché può compromettere la qualità delle risorse idriche e influenzare attività agricole, industriali e civili. Tale problematica è particolarmente significativa nei corsi d'acqua costieri del Mare Adriatico, caratterizzati da un regime microtidale e da condizioni di magra fluviale che favoriscono la risalita del cuneo salino. La presente tesi ha l'obiettivo di sviluppare e valutare strumenti semplificati per la stima dell'intrusione salina mediante il confronto con un modello idrodinamico tridimensionale. A tal fine è stato realizzato un modello numerico 3D di un canale idealizzato a geometria quasi prismatica, utilizzato come laboratorio numerico per l'analisi dei processi di trasporto della salinità. Il modello è stato calibrato attraverso il confronto con dati osservati di salinità e distanza di intrusione salina. Successivamente, si è sviluppato un modello monodimensionale mediante il software HEC-RAS, calibrato sui risultati del modello tridimensionale. Inoltre, alcune formulazioni analitiche ed empiriche note in letteratura sono state calibrate per la stima della distanza di intrusione salina, utilizzando il modello 3D come riferimento. I risultati ottenuti mostrano che il modello 3D replica correttamente il processo fisico e che gli approcci semplificati consentono di ottenere stime affidabili dell'intrusione salina. Nonostante le incertezze associate alla modellazione di un processo complesso, gli strumenti sviluppati possono costituire un valido supporto per applicazioni operative e per la gestione delle risorse idriche in ambiente estuarino.
Estuarine salt wedge intrusion length: comparison of analytical and numerical models for operational applications
Brenna Betti, Bruno
2025/2026
Abstract
Saltwater intrusion in estuaries is a phenomenon of significant scientific and practical interest, as it can compromise water quality and affect agricultural, industrial, and civil activities. This issue is particularly relevant in the coastal watercourses of the Adriatic Sea, which are characterized by a micro tidal regime and low flow conditions that allows the upstream propagation of the salt wedge. The aim of this thesis is to develop and evaluate simplified tools for estimating saltwater intrusion through comparison with a three dimensional hydrodynamic model. To this end, a 3D numerical model of an idealized channel with a quasi prismatic geometry was developed and used as a numerical laboratory for investigating salinity transport processes. The model was calibrated through comparison with observed salinity data and measured saltwater intrusion lengths. Subsequently, a one dimensional model was implemented using the HEC-RAS software and calibrated against the results of the three dimensional model. Analytical and empirical formulations for estimating saltwater intrusion length were also calibrated, using the 3D model as a reference. The results demonstrate that the three dimensional model reproduces the physical process and that the simplified approaches provide reliable estimates of saltwater intrusion. Despite the uncertainties associated with modeling such a complex process, the developed tools can represent valuable support for operational applications and for water resources management in estuarine environments.| File | Dimensione | Formato | |
|---|---|---|---|
|
2026_06_BrennaBetti.pdf
accessibile in internet solo dagli utenti autorizzati
Descrizione: Testo Tesi
Dimensione
10.08 MB
Formato
Adobe PDF
|
10.08 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/260444