The thesis introduces a parametric design framework for 3D models of a range of commercial tires in a non-deformed, moulding configuration within the Siemens NX CAD modelling software environment. In particular, the proposed system significantly reduces the number of interactive modelling operations by establishing a baseline parametric model, from which diverse tire variants within the same product line can be derived through simple mathematical variables and design tables. The design process involves selecting the reference geometry parameters of the tire in accordance with the ISO 4000-1 standard, followed by 3D modelling of a parametric slick tire. Longitudinal grooves are subsequently integrated, followed by lateral grooves with inclined grooves, and concluded with the generation of sipes. Additional detailed parameters for each feature are defined based on the primary reference parameters. The process is implemented across two distinct tire families – the Pirelli GT slicks and the Michelin Pilot Alpin 5 – utilizing different modelling approaches and methodologies. The first case study focuses primarily on the definition of the methodology, whereas the second applies this framework to a real-world model obtained via a reverse engineering process. In both scenarios, the approach leverages the combined use of the 150% method, whereby the model incorporates all potential configurations that are activated or deactivated as required, and the incremental method, which entails the creation of a feature tree with elements dependent on preceding operations,while remaining individually parametrized. In summary, the objectives of the thesis are to assess the state of the art in parametric tire modelling and to identify current and future requirements for the further advancement of this technology, thereby meeting the product variety demanded by the market. The results obtained serve as a foundation for the standardization of tire design by presenting a 3D modelling methodology that departs from the traditional 2D approach currently utilized by most companies in the sector. This framework enables the instantaneous variation of tire dimensions while completely eliminating topological errors within the CAD feature tree.
La presente tesi introduce un sistema di progettazione parametrica per modelli 3D di una gamma di pneumatici commerciali in configurazione di stampaggio non deformata tramite il software di modellazione CAD Siemens NX. In particolare, il sistema presentato contribuisce a ridurre il numero di operazioni di modellazione interattiva grazie ad un modello iniziale parametrizzato dai quali derivano le varianti di pneumatici della stessa linea di prodotto, tramite l’utilizzo di semplici variabili matematiche e tabelle di progettazione. Il processo di progettazione prevede la scelta dei parametri che definiscono geometria di riferimento dello pneumatico in accordo con gli standard normativi ISO 4000-1. In seguito alla modellazione 3D di un modello slick parametrico, vengono integrati i canali longitudinali, con l’aggiunta dei canali laterali e di quelli laterali inclinati, per concludere con la creazione delle lamelle. Per ogni elemento vengono definiti dei parametri ausiliari dipendenti da quelli di riferimento. Il processo viene ripetuto per due famiglie distinte di pneumatici – gli slick Pirelli GT e i Michelin Pilot Alpin 5 – con approcci e metodi differenti. Il primo caso studio si focalizza maggiormente sulla metodologia, mentre il secondo vede tale metodologia applicata ad un modello reale ricavato tramite un processo di reverse engineering. In entrambi i casi, l’approccio prevede l’uso combinato del metodo del 150%, tramite il quale il modello è caratterizzato da tutte le configurazioni possibili che vengono attivate o disattivate in base alla richiesta, e il metodo incrementale, che prevede la creazione di un albero di operazioni dipendenti da quelle precedenti, ma singolarmente parametrizzate. In sintesi, gli obiettivi della tesi consistono nel valutare lo stato dell’arte nella modellazione parametrica degli pneumatici e nell’identificare i requisiti attuali e futuri per un ulteriore sviluppo di questa tecnologia, al fine di soddisfare la varietà di prodotti richiesta dal mercato. I risultati ottenuti fungono da base per la standardizzazione della progettazione degli pneumatici, presentando una metodologia di modellazione 3D che si differenzia da quella tradizionale in 2D attualmente in vigore nella maggior parte delle aziende nel settore. Tale processo porta ad una variazione istantanea delle dimensioni dello pneumatico con il conseguente azzeramento degli errori topologici nell’albero delle funzioni del software di modellazione CAD.
Parametric modelling of car tires
CAFARO, GIACOMO
2025/2026
Abstract
The thesis introduces a parametric design framework for 3D models of a range of commercial tires in a non-deformed, moulding configuration within the Siemens NX CAD modelling software environment. In particular, the proposed system significantly reduces the number of interactive modelling operations by establishing a baseline parametric model, from which diverse tire variants within the same product line can be derived through simple mathematical variables and design tables. The design process involves selecting the reference geometry parameters of the tire in accordance with the ISO 4000-1 standard, followed by 3D modelling of a parametric slick tire. Longitudinal grooves are subsequently integrated, followed by lateral grooves with inclined grooves, and concluded with the generation of sipes. Additional detailed parameters for each feature are defined based on the primary reference parameters. The process is implemented across two distinct tire families – the Pirelli GT slicks and the Michelin Pilot Alpin 5 – utilizing different modelling approaches and methodologies. The first case study focuses primarily on the definition of the methodology, whereas the second applies this framework to a real-world model obtained via a reverse engineering process. In both scenarios, the approach leverages the combined use of the 150% method, whereby the model incorporates all potential configurations that are activated or deactivated as required, and the incremental method, which entails the creation of a feature tree with elements dependent on preceding operations,while remaining individually parametrized. In summary, the objectives of the thesis are to assess the state of the art in parametric tire modelling and to identify current and future requirements for the further advancement of this technology, thereby meeting the product variety demanded by the market. The results obtained serve as a foundation for the standardization of tire design by presenting a 3D modelling methodology that departs from the traditional 2D approach currently utilized by most companies in the sector. This framework enables the instantaneous variation of tire dimensions while completely eliminating topological errors within the CAD feature tree.| File | Dimensione | Formato | |
|---|---|---|---|
|
2026_07_Cafaro.pdf
non accessibile
Descrizione: testo tesi
Dimensione
36.86 MB
Formato
Adobe PDF
|
36.86 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/260500