This thesis focuses on the control and enhancement of the power extracted by a Wave Energy Converter (WEC), a device capable of extracting energy from ocean waves and converting it into electrical energy. The system under investigation is derived from the Energy Double System (EDS) developed at Politecnico di Milano, a particular type of WEC installed nearshore and consisting of two oscillating bodies: a heaving float and a surging paddle. This work considers exclusively the float subsystem composed of the float and its associated Power Take-Off (PTO) system, which is responsible for converting the absorbed wave energy into useful energy. The analysis starts from the laboratory experimental model, which is subsequently scaled according to the Froude similarity criterion in order to obtain the characteristics of the prototype-scale system. The adopted PTO system consists of a Permanent Magnet Linear Synchronous Generator (PMLSG), previously sized for the considered application. To maximise the extracted energy, two PTO control strategies are investigated: resistive loading and latching control. In the former, the device is allowed to oscillate freely, resulting in limited energy absorption; in the latter, the float is intentionally locked and released at specific time instants in order to synchronize its motion with the wave excitation. This strategy enables a significant increase in the absorbed power compared to resistive loading, as demonstrated by the simulation results. The implementation of these control strategies requires an appropriate generator control system based on a power electronic converter. To this end, a control scheme based on the regulation of the direct- and quadrature-axis currents through PI controllers is developed. Finally, the system performance is evaluated through simulations carried out in the MATLAB/Simulink environment. The obtained results allow the considered control strategies to be compared and their effectiveness to be assessed in terms of system dynamic response and average generated power.
La presente tesi ha come obiettivo il controllo e il miglioramento della potenza estratta da un Wave Energy Converter (WEC), un dispositivo in grado di estrarre energia dal moto ondoso e convertirla in energia elettrica. Il sistema oggetto di studio deriva dall’Energy Double System (EDS), un WEC a corpi oscillanti con due gradi di libertà, installato sottocosta e composto da un galleggiante in heave e da una pala in surge, sviluppato presso il Politecnico di Milano. In questo lavoro viene considerato esclusivamente il sottosistema costituito dal galleggiante e dal relativo sistema Power Take-Off (PTO), responsabile della conversione dell’energia ondosa assorbita in energia utile. L’analisi parte dal modello sperimentale di laboratorio, successivamente riscalato mediante il criterio della similitudine di Froude per ottenere le caratteristiche del sistema in scala di prototipo. Come PTO viene adottato un generatore lineare sincrono a magneti permanenti, precedentemente dimensionato per l’applicazione considerata. Per massimizzare l’energia estratta sono state analizzate due strategie di controllo del PTO: il controllo resistivo e il controllo di latching. Nel primo caso il dispositivo è lasciato oscillare liberamente e l’energia assorbita risulta limitata; nel secondo, il galleggiante viene opportunamente bloccato e rilasciato in specifici istanti temporali al fine di sincronizzarne il moto con l’eccitazione ondosa. Tale strategia consente di incrementare significativamente la potenza assorbita rispetto al controllo resistivo, come evidenziato dai risultati delle simulazioni. L’implementazione di queste strategie richiede un opportuno controllo del generatore tramite convertitore elettronico di potenza. A tal fine viene sviluppato un sistema di controllo basato sulla regolazione delle correnti di asse diretto e in quadratura mediante regolatori PI. Infine, le prestazioni del sistema vengono valutate attraverso simulazioni sviluppate in ambiente MATLAB/Simulink. I risultati consentono di confrontare le strategie di controllo considerate e di valutarne l’efficacia in termini di risposta dinamica e potenza media generata.
Modelling and control of a linear generator-based Wave Energy Converter for power extraction optimization
Zurolo, Marco
2025/2026
Abstract
This thesis focuses on the control and enhancement of the power extracted by a Wave Energy Converter (WEC), a device capable of extracting energy from ocean waves and converting it into electrical energy. The system under investigation is derived from the Energy Double System (EDS) developed at Politecnico di Milano, a particular type of WEC installed nearshore and consisting of two oscillating bodies: a heaving float and a surging paddle. This work considers exclusively the float subsystem composed of the float and its associated Power Take-Off (PTO) system, which is responsible for converting the absorbed wave energy into useful energy. The analysis starts from the laboratory experimental model, which is subsequently scaled according to the Froude similarity criterion in order to obtain the characteristics of the prototype-scale system. The adopted PTO system consists of a Permanent Magnet Linear Synchronous Generator (PMLSG), previously sized for the considered application. To maximise the extracted energy, two PTO control strategies are investigated: resistive loading and latching control. In the former, the device is allowed to oscillate freely, resulting in limited energy absorption; in the latter, the float is intentionally locked and released at specific time instants in order to synchronize its motion with the wave excitation. This strategy enables a significant increase in the absorbed power compared to resistive loading, as demonstrated by the simulation results. The implementation of these control strategies requires an appropriate generator control system based on a power electronic converter. To this end, a control scheme based on the regulation of the direct- and quadrature-axis currents through PI controllers is developed. Finally, the system performance is evaluated through simulations carried out in the MATLAB/Simulink environment. The obtained results allow the considered control strategies to be compared and their effectiveness to be assessed in terms of system dynamic response and average generated power.| File | Dimensione | Formato | |
|---|---|---|---|
|
2026_07_Zurolo_Tesi.pdf
accessibile in internet per tutti a partire dal 02/07/2027
Descrizione: Tesi
Dimensione
2.87 MB
Formato
Adobe PDF
|
2.87 MB | Adobe PDF | Visualizza/Apri |
|
2026_07_Zurolo_Executive Summary.pdf
accessibile in internet per tutti a partire dal 02/07/2027
Descrizione: Executive Summary
Dimensione
1.42 MB
Formato
Adobe PDF
|
1.42 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/260814