Flat slab systems are highly used in modern construction due to their architectural flexibility and ability to maximize story height. However, the absence of intermediate supporting beams creates a high concentration of shear forces and negative bending moments directly at the slab-column connections. This phenomenon makes flat slabs particularly vulnerable to brittle punching shear failures and reduces their lateral stiffness. Among international structural codes, American standards (ASCE/ACI) permit the flat slab systems as lateral resisting systems against earthquake loads. While earlier versions of the European structural codes prohibited the use of flat slabs for lateral seismic resistance, more recent versions of European standards now include specific provisions that allow flat slab systems to be utilized within the lateral resisting frame. Several models have been defined to model flat slabs against variable loading conditions. However, in this thesis, the focus of the study is the grid modelling approach proposed by Professor Dario Coronelli [1]. This approach models the slab as a grid of elastic beam elements, concentrating discrete flexural, shear, and torsional point hinges to capture the nonlinear behavior of the system. The focus of this thesis is on the improvement of the formulation for torsional behavior in the Coronelli grid model. Several formulations have been proposed to capture more accurately the torsional behavior of models. Two types of tests have been defined to evaluate the accuracy of the proposed formulations. The purpose of the first test, Test A (nine large-scale slab specimens under pure torsion), is to investigate the accuracy of the torsional behavior elements in the slab. Furthermore, the purpose of Test B (three slab-column structures under localized connection torsion), is to apply the proposed formulation in the connection zone between the column and the slab. This thesis aims to prove the validity and efficiency of the grid modeling approach in simulating the critical torsional behavior of flat slabs. The numerical and analytical results demonstrate the accuracy of the proposed formulation with the physical laboratory data.
I sistemi a soletta piana (o solai a piastra) sono ampiamente utilizzati nelle costruzioni moderne grazie alla loro flessibilità architettonica e alla capacità di massimizzare l'altezza dell'interpiano. Tuttavia, l'assenza di travi di supporto intermedie crea un'elevata concentrazione di forze di taglio e momenti flettenti negativi direttamente in corrispondenza delle connessioni solaio-pilastro. Questo fenomeno rende le solette piane particolarmente vulnerabili alle rotture fragili per punzonamento e ne riduce la rigidezza laterale. Tra le normative strutturali internazionali, gli standard americani (ASCE/ACI) consentono l'uso dei sistemi a soletta piana come sistemi sismo-resistenti rispetto ai carichi orizzontali. Mentre le versioni precedenti delle normative strutturali europee vietavano l'uso delle solette piane per la resistenza sismica laterale, le versioni più recenti degli standard europei includono ora disposizioni specifiche che ne consentono l'impiego all'interno dei telai sismo-resistenti. Sono stati definiti diversi modelli per simulare il comportamento delle solette piane in condizioni di carico variabili. Tuttavia, in questa tesi, il fulcro dello studio è l'approccio di modellazione a graticcio proposto dal Professor Dario Coronelli [1]. Questo approccio modella la soletta come una griglia di elementi trave elastici, concentrando cerniere puntuali discrete flessionali, a taglio e torsionali per catturare il comportamento non lineare del sistema. L'obiettivo principale di questa tesi è il miglioramento della formulazione del comportamento torsionale nel modello a graticcio di Coronelli. Sono state proposte diverse formulazioni per catturare in modo più accurato il comportamento torsionale dei modelli. Sono stati definiti due tipi di test per valutare l'accuratezza delle formulazioni proposte. Lo scopo del primo test, il Test A (nove campioni di soletta in grande scala sottoposti a torsione pura), è quello di indagare l'accuratezza degli elementi di comportamento torsionale nella soletta. Inoltre, lo scopo del Test B (tre strutture solaio pilastro sottoposte a torsione localizzata in corrispondenza della connessione), è di applicare la formulazione proposta nella zona di collegamento tra il pilastro e il solaio. Questa tesi mira a dimostrare la validità e l'efficienza dell'approccio di modellazione a graticcio nel simulare il comportamento torsionale critico delle solette piane. I risultati numerici e analitici dimostrano l'accuratezza della formulazione proposta rispetto ai dati fisici di laboratorio.
Numerical modeling of flat slabs under torsional moment
Oftadeh, Mohammad
2025/2026
Abstract
Flat slab systems are highly used in modern construction due to their architectural flexibility and ability to maximize story height. However, the absence of intermediate supporting beams creates a high concentration of shear forces and negative bending moments directly at the slab-column connections. This phenomenon makes flat slabs particularly vulnerable to brittle punching shear failures and reduces their lateral stiffness. Among international structural codes, American standards (ASCE/ACI) permit the flat slab systems as lateral resisting systems against earthquake loads. While earlier versions of the European structural codes prohibited the use of flat slabs for lateral seismic resistance, more recent versions of European standards now include specific provisions that allow flat slab systems to be utilized within the lateral resisting frame. Several models have been defined to model flat slabs against variable loading conditions. However, in this thesis, the focus of the study is the grid modelling approach proposed by Professor Dario Coronelli [1]. This approach models the slab as a grid of elastic beam elements, concentrating discrete flexural, shear, and torsional point hinges to capture the nonlinear behavior of the system. The focus of this thesis is on the improvement of the formulation for torsional behavior in the Coronelli grid model. Several formulations have been proposed to capture more accurately the torsional behavior of models. Two types of tests have been defined to evaluate the accuracy of the proposed formulations. The purpose of the first test, Test A (nine large-scale slab specimens under pure torsion), is to investigate the accuracy of the torsional behavior elements in the slab. Furthermore, the purpose of Test B (three slab-column structures under localized connection torsion), is to apply the proposed formulation in the connection zone between the column and the slab. This thesis aims to prove the validity and efficiency of the grid modeling approach in simulating the critical torsional behavior of flat slabs. The numerical and analytical results demonstrate the accuracy of the proposed formulation with the physical laboratory data.| File | Dimensione | Formato | |
|---|---|---|---|
|
Presentazione_Oftadeh_final.pdf
accessibile in internet per tutti
Dimensione
12.32 MB
Formato
Adobe PDF
|
12.32 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/260900