This thesis investigates the hydrodynamic and hydroacoustic performance of a bio-inspired propulsion system based on oscillating compliant fins, with the aim of evaluating its potential as an alternative to conventional marine propellers. The study is motivated by the increasing need to reduce underwater noise emissions generated by marine vehicles, which can negatively affect both marine ecosystems and human activities. The DTMB4119 marine propeller was selected as a reference system and compared with a fin-based propulsion system inspired by the carangiform swimming mode of fish. An experimental test bench was designed and assembled to perform hydrodynamic and hydroacoustic measurements. The setup included a DTMB4119 propeller system, a fin propulsion system with interchangeable silicone fins, force and pressure sensors, and dedicated electronics for data acquisition and control. Three fin geometries were manufactured and tested in order to identify the most suitable configuration. Subsequently, multi-fin arrangements inspired by fish schooling were investigated through diamond and phalanx formations. The results show that the single-fin propulsion system can achieve high thrust forces, while requiring significantly lower power consumption compared to the conventional propeller. Among the tested fins, the forked geometry provided the best overall performance and was therefore selected for the schooling experiments. The multi-fin configurations further improved thrust generation, with the phalanx arrangement producing the highest thrust force under static conditions, while the diamond configuration achieved the best thrust performance when tested in a moving condition. Hydroacoustic measurements revealed that the single-fin system exhibited the highest acoustic stealth performance, while the schooling formations generated different directivity patterns depending on their spatial arrangement. Overall, the experimental findings demonstrate the potential of bio-inspired propulsion systems as efficient propulsion solutions, since they can produce thrust while requiring lower power consumption, and as low-noise systems, thanks to the reverse Von Karman street they generate. This wake can more easily blend with the hydrodynamic disturbances naturally present in marine environments and can be directed toward specific regions depending on the fin configuration adopted, offering additional possibilities for reducing the acoustic footprint of future marine vehicles and autonomous underwater devices.
Questa tesi analizza le prestazioni idrodinamiche e idroacustiche di un sistema di propulsione bioispirato basato su pinne flessibili oscillanti, con l’obiettivo di valutarne il potenziale come alternativa alle eliche marine convenzionali. Lo studio è motivato dalla crescente necessità di ridurre le emissioni di rumore subacqueo generate dai veicoli marini, che possono avere effetti negativi sia sugli ecosistemi marini sia sulle attività umane. L’elica marina DTMB4119 è stata scelta come sistema di riferimento e confrontata con un sistema di propulsione a pinna ispirato al movimento natatorio carangiforme dei pesci. È stato progettato e assemblato un banco prova sperimentale per eseguire misure idrodinamiche e idroacustiche. L’apparato sperimentale comprendeva un sistema con l'elica DTMB4119, un sistema di propulsione a pinna con pinne in silicone intercambiabili, sensori di forza e di pressione, nonché un’elettronica dedicata all’acquisizione e al controllo dei dati. Sono state realizzate e testate tre diverse geometrie di pinna al fine di individuare la geometria più adatta. Successivamente, sono state investigate configurazioni multi-pinna ispirate al comportamento di nuoto dei banchi di pesci, mediante disposizioni a diamante e a falange. I risultati mostrano che il sistema di propulsione a pinna singola è in grado di generare elevate forze di spinta, richiedendo al contempo un consumo energetico significativamente inferiore rispetto all’elica convenzionale. Tra le pinne testate, la geometria biforcuta ha fornito le migliori prestazioni complessive ed è stata quindi selezionata per gli esperimenti sulle configurazioni in banco. Le configurazioni multi-pinna hanno ulteriormente migliorato la generazione di spinta: la disposizione a falange ha prodotto la massima forza di spinta in condizioni statiche, mentre la configurazione a diamante ha ottenuto le migliori prestazioni propulsive in condizioni di moto. Le misure idroacustiche hanno evidenziato che il sistema a pinna singola presenta le migliori caratteristiche stealth, mentre le configurazioni in banco generano differenti pattern di direttività a seconda della loro disposizione spaziale. Nel complesso, i risultati sperimentali dimostrano il potenziale dei sistemi di propulsione bioispirati sia come soluzioni propulsive efficienti, in grado di generare spinta con un minore consumo energetico, sia come sistemi a bassa emissione acustica, grazie alla scia inversa di Von Kármán che producono. Tale scia può mimetizzarsi più facilmente con le perturbazioni idrodinamiche naturalmente presenti negli ambienti marini e può essere direzionata verso regioni specifiche in funzione della configurazione delle pinne adottata, offrendo ulteriori possibilità per ridurre l’impronta acustica dei futuri veicoli marini e dei dispositivi subacquei autonomi.
Bio-inspired propulsion systems for enhanced efficiency and acoustic stealth in marine vehicles
DAMIA, PIETRO MARIA
2025/2026
Abstract
This thesis investigates the hydrodynamic and hydroacoustic performance of a bio-inspired propulsion system based on oscillating compliant fins, with the aim of evaluating its potential as an alternative to conventional marine propellers. The study is motivated by the increasing need to reduce underwater noise emissions generated by marine vehicles, which can negatively affect both marine ecosystems and human activities. The DTMB4119 marine propeller was selected as a reference system and compared with a fin-based propulsion system inspired by the carangiform swimming mode of fish. An experimental test bench was designed and assembled to perform hydrodynamic and hydroacoustic measurements. The setup included a DTMB4119 propeller system, a fin propulsion system with interchangeable silicone fins, force and pressure sensors, and dedicated electronics for data acquisition and control. Three fin geometries were manufactured and tested in order to identify the most suitable configuration. Subsequently, multi-fin arrangements inspired by fish schooling were investigated through diamond and phalanx formations. The results show that the single-fin propulsion system can achieve high thrust forces, while requiring significantly lower power consumption compared to the conventional propeller. Among the tested fins, the forked geometry provided the best overall performance and was therefore selected for the schooling experiments. The multi-fin configurations further improved thrust generation, with the phalanx arrangement producing the highest thrust force under static conditions, while the diamond configuration achieved the best thrust performance when tested in a moving condition. Hydroacoustic measurements revealed that the single-fin system exhibited the highest acoustic stealth performance, while the schooling formations generated different directivity patterns depending on their spatial arrangement. Overall, the experimental findings demonstrate the potential of bio-inspired propulsion systems as efficient propulsion solutions, since they can produce thrust while requiring lower power consumption, and as low-noise systems, thanks to the reverse Von Karman street they generate. This wake can more easily blend with the hydrodynamic disturbances naturally present in marine environments and can be directed toward specific regions depending on the fin configuration adopted, offering additional possibilities for reducing the acoustic footprint of future marine vehicles and autonomous underwater devices.| File | Dimensione | Formato | |
|---|---|---|---|
|
2026_07_Damia_tesi.pdf
non accessibile
Descrizione: Tesi
Dimensione
31.43 MB
Formato
Adobe PDF
|
31.43 MB | Adobe PDF | Visualizza/Apri |
|
2026_07_Damia_ExecutiveSummary.pdf
non accessibile
Descrizione: Executive Summary
Dimensione
6.31 MB
Formato
Adobe PDF
|
6.31 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/261090