Ion exchange resins (IERs) are polymeric materials used for water purification and contaminant removal, including chemical control and effluent decontamination in nuclear power plants. When discarded as spent (SIERs), their organic nature and incompatibility with conditioning matrices render their management challenging. This thesis work, developed within the framework of the European Partnership on Radioactive Waste Management–2 (EURAD-2), proposes an innovative strategy for nuclear-grade SIERs based on a novel concept: a self-catalysed wet oxidation, in which metallic species already retained within the resin act as a catalyst, eliminating the need for an external Fe source. The resulting residue is conditioned in a newly developed acid-activated geopolymer matrix, based on aluminium dihydrogen phosphate. Surrogate cationic and anionic resins were loaded with stable representatives of corrosion products (Fe, Cr, Ni, Mn, and Co), fission products (Cs and Sr), and B to simulate a realistic waste stream. A release kinetics study demonstrated that the Fe mobilised from the contaminated resin is of the same magnitude as that supplied by the fly ash employed in the previously developed heterogeneous process at POLIMI. The oxidative degradation, developed at a small scale (10 g) and subsequently scaled up to 100 g, was optimised under more effective conditions. The optimised process achieved a weight reduction ratio of 83%, a carbon reduction of 97.6%, and a COD abatement of 98%, while minimising foaming and yielding a dry, predominantly amorphous residue (86 wt.%) with borate–sulphate chemistry. The obtained residue was directly encapsulated in the selected geopolymer matrix up to an equivalent loading factor of 88%. The resulting waste forms satisfied the national Waste Acceptance Criteria defined by ISIN in terms of compressive strength, both after 28-d of curing and after 90-d of immersion, and Cs leachability, with LCs in the range 9.3–10.1. The innovative approach developed enables the immobilisation of an equivalent resin mass up to 18 times greater than that achievable by the reference direct cementation, resulting in a substantial reduction of the final waste form volume and of the associated disposal costs.
Le resine a scambio ionico sono materiali polimerici utilizzati per la purificazione dell’acqua e la rimozione di contaminanti, inclusi il controllo chimico e la decontaminazione degli effluenti acquosi nelle centrali nucleari. Una volta esauste, la loro natura organica e l’incompatibilità con le matrici di incapsulamento rendono complessa la gestione. Questo lavoro di tesi, sviluppato nell’ambito della European Partnership on Radioactive Waste Management–2 (EURAD-2), propone una strategia innovativa basata su un nuovo concetto: un’ossidazione umida autocatalizzata, in cui specie metalliche già trattenute nella resina agiscono come catalizzatore, eliminando la necessità di una sorgente esterna di Fe. Il residuo risultante viene condizionato in una matrice geopolimerica acido-attivata basata su alluminio diidrogenofosfato. Resine cationiche e anioniche surrogate sono state preparate caricandole con rappresentanti stabili di prodotti di corrosione (Fe, Cr, Ni, Mn e Co), prodotti di fissione (Cs e Sr) e B, per simulare un flusso di rifiuto realistico. Uno studio della cinetica di rilascio ha dimostrato che il Fe mobilizzato dalla resina contaminata è dello stesso ordine di grandezza di quello fornito dalla fly ash impiegata nel processo eterogeneo precedentemente sviluppato presso POLIMI. La degradazione ossidativa, sviluppata su piccola scala (10 g) e implementata fino a 100 g, è stata ottimizzata, raggiungendo un rapporto di riduzione in massa dell’83%, una riduzione del carbonio del 97,6% e un abbattimento del COD del 98%, minimizzando le schiume e producendo un residuo secco e prevalentemente amorfo (86 wt.%) a chimica borato-solfatica. Il residuo così ottenuto è stato direttamente incapsulato nella matrice geopolimerica selezionata fino a un fattore di caricamento equivalente dell’88%. Il manufatto risultante ha soddisfatto i Criteri di Accettabilità Nazionali dei rifiuti radioattivi definiti da ISIN in termini di resistenza a compressione, dopo 28 giorni di curing e dopo 90 giorni di immersione, e di lisciviazione del Cs, con valori di LCs compresi tra 9,3 e 10,1. L’approccio sviluppato consente l’immobilizzazione di una massa equivalente di resina fino a 18 volte superiore rispetto alla cementazione diretta di riferimento, con una sostanziale riduzione del volume finale di rifiuto condizionato e dei costi di smaltimento associati.
Innovative predisposal strategy for spent ion exchange resins: self-catalysed fenton treatment and conditioning in acid geopolymer
Milazzo, Alberto
2025/2026
Abstract
Ion exchange resins (IERs) are polymeric materials used for water purification and contaminant removal, including chemical control and effluent decontamination in nuclear power plants. When discarded as spent (SIERs), their organic nature and incompatibility with conditioning matrices render their management challenging. This thesis work, developed within the framework of the European Partnership on Radioactive Waste Management–2 (EURAD-2), proposes an innovative strategy for nuclear-grade SIERs based on a novel concept: a self-catalysed wet oxidation, in which metallic species already retained within the resin act as a catalyst, eliminating the need for an external Fe source. The resulting residue is conditioned in a newly developed acid-activated geopolymer matrix, based on aluminium dihydrogen phosphate. Surrogate cationic and anionic resins were loaded with stable representatives of corrosion products (Fe, Cr, Ni, Mn, and Co), fission products (Cs and Sr), and B to simulate a realistic waste stream. A release kinetics study demonstrated that the Fe mobilised from the contaminated resin is of the same magnitude as that supplied by the fly ash employed in the previously developed heterogeneous process at POLIMI. The oxidative degradation, developed at a small scale (10 g) and subsequently scaled up to 100 g, was optimised under more effective conditions. The optimised process achieved a weight reduction ratio of 83%, a carbon reduction of 97.6%, and a COD abatement of 98%, while minimising foaming and yielding a dry, predominantly amorphous residue (86 wt.%) with borate–sulphate chemistry. The obtained residue was directly encapsulated in the selected geopolymer matrix up to an equivalent loading factor of 88%. The resulting waste forms satisfied the national Waste Acceptance Criteria defined by ISIN in terms of compressive strength, both after 28-d of curing and after 90-d of immersion, and Cs leachability, with LCs in the range 9.3–10.1. The innovative approach developed enables the immobilisation of an equivalent resin mass up to 18 times greater than that achievable by the reference direct cementation, resulting in a substantial reduction of the final waste form volume and of the associated disposal costs.| File | Dimensione | Formato | |
|---|---|---|---|
|
2026_07_Milazzo_thesis.pdf
non accessibile
Descrizione: Testo Tesi
Dimensione
5.7 MB
Formato
Adobe PDF
|
5.7 MB | Adobe PDF | Visualizza/Apri |
|
2026_07_Milazzo_executive_summary.pdf
non accessibile
Descrizione: Testo Executive Summary
Dimensione
917.52 kB
Formato
Adobe PDF
|
917.52 kB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/261113