Regeneratively cooled rocket engine thrust chambers operate under extreme thermomechanical loading conditions. In this context, GRCop-42 is a promising Cu–Cr–Nb alloy for high-heat-flux components. Thanks to its very high thermal conductivity, GRCop- 42 can operate at lower temperatures than other candidate materials under comparable operating conditions, thereby positively affecting fatigue life. The expected long service life makes GRCop-42 an excellent candidate for reusable rocket engines, which are receiving increasing attention, and makes an accurate characterization of its low-cycle fatigue behavior necessary to assess its applicability to such systems. This thesis presents the experimental characterization and constitutive modeling of LPBF GRCop-42 under severe plasticity conditions. The effect of Hot Isostatic Pressing on porosity, microstructure, and tensile properties was investigated through optical microscopy, Electron Backscatter Diffraction and Digital Image Correlation tensile tests. The mechanical response was characterized through tensile tests at room temperature, 527 °C and 627 °C, and low-cycle fatigue tests. At 627 °C, the cyclic stress response was used to calibrate a Voce-Chaboche cyclic plasticity model. Low-cycle fatigue tests with dwell periods and a dedicated stress-relaxation test were used to quantify relaxation effects and calibrate a Norton creep law. The cyclic plasticity and creep models were validated against the low-cycle fatigue tests with dwell periods through finite element simulations, and were then implemented in a thermo-mechanical model of a regeneratively cooled bimetallic thrust chamber. The model allowed hot-wall plastic and creep strain accumulation, as well as cooling-channel deformation, to be assessed. Overall, this work provides experimental data, calibrated constitutive parameters, and a finite element modeling strategy for additively manufactured GRCop-42 components subjected to high-temperature cyclic plasticity and creep.
Le camere di spinta dei motori a razzo con raffreddamento rigenerativo operano in condizioni di carico termomeccanico estreme. In questo contesto, il GRCop-42 è una promettente lega Cu–Cr–Nb per componenti ad alto flusso termico. Grazie alla sua elevata conducibilità termica, il GRCop-42 può operare a temperature inferiori rispetto ad altri materiali candidati a parità di condizioni operative, a tutto beneficio della vita a fatica. La lunga vita in servizio attesa rende il GRCop-42 un ottimo candidato per motori a razzo riutilizzabili, oggi oggetto di crescente interesse, e rende necessaria un’accurata analisi del suo comportamento a fatica oligociclica per valutarne l’applicabilità a tali sistemi. Questa tesi presenta la caratterizzazione sperimentale e la modellazione costitutiva del GRCop-42 prodotto mediante LPBF in condizioni di alta plasticizzazione. L’effetto dell’HIP su porosità, microstruttura e proprietà a trazione è stato studiato mediante microscopia ottica, Electron Backscatter Diffraction e prove di trazione con Digital Image Correlation. Il comportamento meccanico è stato studiato mediante prove di trazione a temperatura ambiente, a 527 °C e a 627 °C, e prove di fatica oligociclica. A 627 °C, la risposta ciclica in tensione è stata utilizzata per calibrare un modello di plasticità ciclica di Voce–Chaboche. Prove di fatica a basso numero di cicli con periodi di mantenimento e un’apposita prova di rilassamento sono state impiegate per quantificare gli effetti di rilassamento e calibrare una legge di creep di Norton. I modelli di plasticità ciclica e creep sono stati validati rispetto alle prove di fatica a basso numero di cicli con mantenimento mediante simulazioni agli elementi finiti, e sono stati successivamente implementati in un modello termomeccanico di una camera di spinta bimetallica con raffreddamento rigenerativo. Il modello ha consentito di valutare l’accumulo di deformazione plastica e da creep nella parete calda, insieme alla deformazione dei canali di raffreddamento. Nel complesso, questo lavoro fornisce dati sperimentali, parametri costitutivi calibrati e una strategia di modellazione agli elementi finiti per componenti in GRCop-42 prodotti mediante produzione additiva e soggetti a plasticità ciclica e creep ad alta temperatura.
Experimental characterization and constitutive modeling of GRCop-42 fatigue behavior under severe plasticity conditions
Bassi, Andrea
2025/2026
Abstract
Regeneratively cooled rocket engine thrust chambers operate under extreme thermomechanical loading conditions. In this context, GRCop-42 is a promising Cu–Cr–Nb alloy for high-heat-flux components. Thanks to its very high thermal conductivity, GRCop- 42 can operate at lower temperatures than other candidate materials under comparable operating conditions, thereby positively affecting fatigue life. The expected long service life makes GRCop-42 an excellent candidate for reusable rocket engines, which are receiving increasing attention, and makes an accurate characterization of its low-cycle fatigue behavior necessary to assess its applicability to such systems. This thesis presents the experimental characterization and constitutive modeling of LPBF GRCop-42 under severe plasticity conditions. The effect of Hot Isostatic Pressing on porosity, microstructure, and tensile properties was investigated through optical microscopy, Electron Backscatter Diffraction and Digital Image Correlation tensile tests. The mechanical response was characterized through tensile tests at room temperature, 527 °C and 627 °C, and low-cycle fatigue tests. At 627 °C, the cyclic stress response was used to calibrate a Voce-Chaboche cyclic plasticity model. Low-cycle fatigue tests with dwell periods and a dedicated stress-relaxation test were used to quantify relaxation effects and calibrate a Norton creep law. The cyclic plasticity and creep models were validated against the low-cycle fatigue tests with dwell periods through finite element simulations, and were then implemented in a thermo-mechanical model of a regeneratively cooled bimetallic thrust chamber. The model allowed hot-wall plastic and creep strain accumulation, as well as cooling-channel deformation, to be assessed. Overall, this work provides experimental data, calibrated constitutive parameters, and a finite element modeling strategy for additively manufactured GRCop-42 components subjected to high-temperature cyclic plasticity and creep.| File | Dimensione | Formato | |
|---|---|---|---|
|
TESI_Andrea Bassi.pdf
non accessibile
Descrizione: TESI
Dimensione
139.61 MB
Formato
Adobe PDF
|
139.61 MB | Adobe PDF | Visualizza/Apri |
|
Executive_Summary_Andrea Bassi.pdf
non accessibile
Dimensione
18.56 MB
Formato
Adobe PDF
|
18.56 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/261180