Ocular hypertension represents one of the main risk factors for the development of glau coma, a neurodegenerative disease that can cause irreversible damage to the optic nerve and vision loss. For this reason, accurate measurement of intraocular pressure plays a fundamental role in the diagnosis and monitoring of the disease. Among the available tonometric techniques, non-contact methods, such as those based on the Corvis ST de vice, are particularly advantageous as they allow intraocular pressure to be estimated from corneal deformation induced by a high-velocity air puff. The absence of direct contact with the ocular surface ensures rapidity, ease of use, and reduced invasiveness; however, the measurements are strongly influenced by the mechanical and geometric properties of the cornea. For this reason, several correction algorithms have been proposed over the years, including the one developed by Redaelli et al., which is based on the analysis of the maximum velocity of the corneal apex, with the aim of reducing the dependence of intraocular pressure estimation on tissue properties. The present work aims to experi mentally validate this approach, comparing numerical predictions with measurements on ex vivo rabbit and porcine eyes obtained using the Corvis ST. A dedicated experimental setup was also developed, comprising custom 3D-printed supports, a sensor for measuring the true intraocular pressure, and a pressure regulation system. The results obtained allowed the algorithm proposed by Redaelli et al. to be compared with the one implemented in the Corvis ST, as well as to be modified and adapted to the acquired experimental dataset. Overall, the methodology shows potential for clinical applicability in the correction of intraocular pressure in human subjects, although further developments are required, including the enlargement of the dataset, the reduction of measurement uncertainties, and validation on more representative biological models.
L’ipertensione oculare rappresenta uno dei principali fattori di rischio per lo sviluppo del glaucoma, una patologia neurodegenerativa che può causare danni irreversibili al nervo ottico e perdita della vista. Per questo motivo, la misurazione accurata della pressione intraoculare riveste un ruolo fondamentale nella diagnosi e nel monitoraggio della malat tia. Tra le tecniche tonometriche disponibili, quelle a non contatto, come quella che sfrutta il dispositivo Corvis ST, risultano particolarmente vantaggiose, poiché consentono di stimare la pressione intraoculare a partire dalla deformazione della cornea, indotta da un getto d’aria ad alta velocità. L’assenza di contatto diretto con la superficie ocu lare garantisce rapidità, semplicità d’uso e ridotta invasività, tuttavia le misure risultano fortemente influenzate dalle proprietà meccaniche e geometriche della cornea. Per questo motivo, negli anni sono stati proposti diversi algoritmi di correzione, tra cui quello svilup pato dal gruppo di ricerca di Redaelli et al., basato sull’analisi della velocità massima dell’apice corneale, con l’obiettivo di ridurre la dipendenza della stima della pressione intraoculare dalle proprietà tissutali. Il presente lavoro ha l’obiettivo di validare sper imentalmente tale approccio, confrontando le predizioni numeriche con misurazioni su occhi ex vivo di coniglio e porcini ottenute mediante Corvis ST. Per l’acquisizione dei dati è stato sviluppato un setup sperimentale dedicato, comprendente supporti customizzati realizzati tramite stampa 3D, un sensore per la misurazione della pressione intraoculare reale e un sistema per la sua regolazione. I risultati ottenuti hanno permesso di confrontare l’algoritmo proposto dal gruppo di ricerca di Redaelli et al. con quello implementato nel Corvis ST, nonché di modificarlo, adattandolo al dataset sperimentale acquisito. Nel complesso, la metodologia mostra un potenziale di applicabilità clinica per la correzione della pressione intraoculare nei soggetti umani, sebbene siano necessari ulteriori sviluppi basati sull’ampliamento del dataset, sulla riduzione delle incertezze di misura e su validazioni su modelli biologici più rappresentativi.
Experimental validation of a novel intraocular pressure estimation method
Rapretti, Luca
2025/2026
Abstract
Ocular hypertension represents one of the main risk factors for the development of glau coma, a neurodegenerative disease that can cause irreversible damage to the optic nerve and vision loss. For this reason, accurate measurement of intraocular pressure plays a fundamental role in the diagnosis and monitoring of the disease. Among the available tonometric techniques, non-contact methods, such as those based on the Corvis ST de vice, are particularly advantageous as they allow intraocular pressure to be estimated from corneal deformation induced by a high-velocity air puff. The absence of direct contact with the ocular surface ensures rapidity, ease of use, and reduced invasiveness; however, the measurements are strongly influenced by the mechanical and geometric properties of the cornea. For this reason, several correction algorithms have been proposed over the years, including the one developed by Redaelli et al., which is based on the analysis of the maximum velocity of the corneal apex, with the aim of reducing the dependence of intraocular pressure estimation on tissue properties. The present work aims to experi mentally validate this approach, comparing numerical predictions with measurements on ex vivo rabbit and porcine eyes obtained using the Corvis ST. A dedicated experimental setup was also developed, comprising custom 3D-printed supports, a sensor for measuring the true intraocular pressure, and a pressure regulation system. The results obtained allowed the algorithm proposed by Redaelli et al. to be compared with the one implemented in the Corvis ST, as well as to be modified and adapted to the acquired experimental dataset. Overall, the methodology shows potential for clinical applicability in the correction of intraocular pressure in human subjects, although further developments are required, including the enlargement of the dataset, the reduction of measurement uncertainties, and validation on more representative biological models.| File | Dimensione | Formato | |
|---|---|---|---|
|
2026_7_Rapretti_Tesi.pdf
accessibile in internet solo dagli utenti autorizzati
Descrizione: Testo della tesi
Dimensione
38.9 MB
Formato
Adobe PDF
|
38.9 MB | Adobe PDF | Visualizza/Apri |
|
2026_7_Rapretti_Executive Summary.pdf
accessibile in internet solo dagli utenti autorizzati
Descrizione: Testo dell'executive summary
Dimensione
5.54 MB
Formato
Adobe PDF
|
5.54 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/261223