The present thesis investigates a novel predictive strategy for unsteady mesh adaptation. Standard adaptation procedures typically require frequent remeshing to prevent the mesh from lagging behind the evolving flow solution. The proposed approach instead relies on computer vision algorithms to reduce the remeshing frequency while preserving solution accuracy. The method is based on computing a metric function that represents the target grid spacing at the latest available solution time step and at a previous one. The displacement of the flow features between these two time levels is then identified, and the metric function is advected to predict the future location of the features over subsequent time steps. The predicted metrics are finally combined into a single metric field, which is used to drive mesh adaptation. Four test cases are considered to assess the proposed methodology: a one-dimensional piston problem, a cylindrical shock without obstacles, a cylindrical shock interacting with an obstacle, and a waves propagation in a city plaza. The prediction workflow, in the first test cases, has been evaluated through a posteriori analyses performed outside the CFD simulation environment, while, in the last two cases, it has been integrated and tested within the CFD solver to assess its effectiveness in coupled simulations. The results presented in this work demonstrate the potential of the proposed approach and also indicate promising extensions toward more complex scenarios, including anisotropic adaptation, three-dimensional simulations, and unsteady Navier–Stokes computations with turbulence modeling.
La presente tesi analizza una strategia predittiva innovativa per l'adattazione di griglia non stazionaria. Le procedure di adattazione standard tipicamente richiedono che la griglia sia aggiornata frequentemente per evitare che rimanga indietro rispetto alla soluzione che evolve. L'approccio proposto invece è basato su algoritmi di visione artificiale per ridurre la frequenza di aggiornamento della griglia e allo stesso tempo preservare l'accuratezza della soluzione. Il metodo è basato sul calcolo di una metrica che rappresenta la spaziatura desiderata all'ultimo istante temporale disponibile e a un istante precedente della soluzione. Viene identificato il movimento delle strutture del flusso tra questi due istanti e la metrica viene trasportata per prevedere la posizione futura delle strutture negli istanti successivi. Le metriche previste vengono combinate in una singola metrica che viene usata per guidare l'adattazione della griglia. Sono considerati quattro casi di test per valutare la metodologia proposta: un piston problem monodimensionale, un'onda cilindrica senza ostacoli, un'onda cilindrica che interagisce con un ostacolo e la propagazione di onde in una piazza cittadina. Il flusso di predizione, nei primi casi, è valutato attraverso analisi a posteriori effettuate al di fuori dell'ambiente di simulazione CFD, mentre negli ultimi due casi è stato integrato e testato all'interno del solutore CFD per valutare la sua efficacia in simulazioni accoppiate. I risultati presentati dimostrano il potenziale dell'approccio proposto e indicano estensioni promettenti verso scenari più complessi, che includono adattazione anisotropa, simulazioni tridimensionali e problemi non stazionari governati dalle equazioni di Navier–Stokes con modellazione della turbolenza.
Predictive mesh adaptation for unsteady 2D Euler simulations
Vacca, Alberto
2025/2026
Abstract
The present thesis investigates a novel predictive strategy for unsteady mesh adaptation. Standard adaptation procedures typically require frequent remeshing to prevent the mesh from lagging behind the evolving flow solution. The proposed approach instead relies on computer vision algorithms to reduce the remeshing frequency while preserving solution accuracy. The method is based on computing a metric function that represents the target grid spacing at the latest available solution time step and at a previous one. The displacement of the flow features between these two time levels is then identified, and the metric function is advected to predict the future location of the features over subsequent time steps. The predicted metrics are finally combined into a single metric field, which is used to drive mesh adaptation. Four test cases are considered to assess the proposed methodology: a one-dimensional piston problem, a cylindrical shock without obstacles, a cylindrical shock interacting with an obstacle, and a waves propagation in a city plaza. The prediction workflow, in the first test cases, has been evaluated through a posteriori analyses performed outside the CFD simulation environment, while, in the last two cases, it has been integrated and tested within the CFD solver to assess its effectiveness in coupled simulations. The results presented in this work demonstrate the potential of the proposed approach and also indicate promising extensions toward more complex scenarios, including anisotropic adaptation, three-dimensional simulations, and unsteady Navier–Stokes computations with turbulence modeling.| File | Dimensione | Formato | |
|---|---|---|---|
|
2026_07_Vacca_Thesis_01.pdf
accessibile in internet per tutti
Descrizione: testo tesi
Dimensione
13.39 MB
Formato
Adobe PDF
|
13.39 MB | Adobe PDF | Visualizza/Apri |
|
2026_07_Vacca_Executive_Summary_01.pdf
accessibile in internet per tutti
Descrizione: executive summary
Dimensione
4.49 MB
Formato
Adobe PDF
|
4.49 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/261309