Small Solar System Bodies (SSSBs), often characterized by “rubble-pile” structures, hold fundamental clues regarding the formation and evolution of planetary systems. Measuring the shear strength parameters of their regolith in situ, namely the internal friction angle and cohesion, is crucial to understanding their mechanical behaviour and ensuring the success of future surface operations. However, the peculiar surface conditions of these bodies, together with stringent mission constraints, require a fundamental rethinking of conventional terrestrial laboratory approaches. This thesis presents the conceptual design, analytical modeling, and experimental validation of BART (Blade and Axial Regolith Tester), an innovative hybrid geotechnical tool conceived for low-gravity environments. BART features an in-line architecture, comprising a penetrometer with a 60◦ conical tip and a shear vane positioned upstream on the same shaft. This geometry enables the two instruments to operate independently without mutual interference, allowing for the decoupled estimation of both internal friction angle and cohesion. The measurement strategy is grounded in the Durgunoglu & Mitchell bearing capacity theory and classical shear vane models. The experimental validation was conducted using a rotational rheometer alongside specifically selected regolith simulants: Mount Etna volcanic sand for frictional properties and potato starch for cohesive behaviour. The results demonstrate high accuracy in retrieving both parameters, confirming the operational principles of the instrument. Finally, the preliminary sizing and operational profile of BART were defined for the scenario of JAXA’s MMX (Martian Moons eXploration) mission to Phobos. In this framework, a mechanical actuation system based on a single-motor “lift-and-rotate” mechanism was designed. Applied to a realistic operational scenario, this study provides a proof-of-concept that demonstrates the instrument’s potential as a payload for future small-body exploration.
I corpi minori del Sistema Solare (SSSBs), spesso caratterizzati da strutture “rubble-pile” (aggregati di detriti), custodiscono indizi fondamentali sulla formazione e l’evoluzione dei sistemi planetari. Misurare in situ i parametri di resistenza al taglio della loro regolite, cioè l’angolo di attrito interno e la coesione, è cruciale per comprenderne il comportamento meccanico e garantire il successo delle future operazioni di superficie. Tuttavia, le particolari condizioni superficiali di questi corpi, insieme ai severi vincoli di missione, impongono un ripensamento radicale degli approcci tradizionalmente adottati nei laboratori terrestri. Questa tesi presenta il progetto concettuale, la modellazione analitica e la validazione sperimentale di BART (Blade and Axial Regolith Tester), un innovativo strumento geotecnico ibrido concepito per ambienti a bassa gravità. BART utilizza un’architettura in linea, dotata di un penetrometro con punta conica a 60◦ e uno scissometro posizionato a monte sullo stesso albero. Questa geometria permette ai due strumenti di operare separatamente senza influenzarsi a vicenda, consentendo la stima disaccoppiata sia dell’angolo di attrito interno che della coesione. La strategia di misurazione si fonda sulla teoria della capacità portante di Durgunoglu & Mitchell e sui modelli classici dello scissometro. La validazione sperimentale è stata condotta impiegando un reometro rotazionale e simulanti di regolite scelti appositamente: sabbia vulcanica dell’Etna per le caratteristiche d’attrito e fecola di patate per il comportamento coesivo. I risultati dimostrano un’elevata accuratezza nel recuperare entrambi i parametri, confermando i principi operativi dello strumento. Infine, sono stati definiti il dimensionamento preliminare e il profilo operativo di BART per lo scenario della missione MMX (Martian Moons eXploration) della JAXA su Phobos. In tale contesto è stato progettato un sistema di attuazione meccanica basato su un meccanismo “solleva-e-ruota” a singolo motore. Applicato a uno scenario operativo realistico, questo studio fornisce una proof-of-concept che dimostra il potenziale dello strumento come payload per la futura esplorazione di corpi minori.
Design and testing of BART (Blade and Axial Regolith Tester): a hybrid geotechnical instrument for Small-Body exploration
Mariani, Alessandro
2025/2026
Abstract
Small Solar System Bodies (SSSBs), often characterized by “rubble-pile” structures, hold fundamental clues regarding the formation and evolution of planetary systems. Measuring the shear strength parameters of their regolith in situ, namely the internal friction angle and cohesion, is crucial to understanding their mechanical behaviour and ensuring the success of future surface operations. However, the peculiar surface conditions of these bodies, together with stringent mission constraints, require a fundamental rethinking of conventional terrestrial laboratory approaches. This thesis presents the conceptual design, analytical modeling, and experimental validation of BART (Blade and Axial Regolith Tester), an innovative hybrid geotechnical tool conceived for low-gravity environments. BART features an in-line architecture, comprising a penetrometer with a 60◦ conical tip and a shear vane positioned upstream on the same shaft. This geometry enables the two instruments to operate independently without mutual interference, allowing for the decoupled estimation of both internal friction angle and cohesion. The measurement strategy is grounded in the Durgunoglu & Mitchell bearing capacity theory and classical shear vane models. The experimental validation was conducted using a rotational rheometer alongside specifically selected regolith simulants: Mount Etna volcanic sand for frictional properties and potato starch for cohesive behaviour. The results demonstrate high accuracy in retrieving both parameters, confirming the operational principles of the instrument. Finally, the preliminary sizing and operational profile of BART were defined for the scenario of JAXA’s MMX (Martian Moons eXploration) mission to Phobos. In this framework, a mechanical actuation system based on a single-motor “lift-and-rotate” mechanism was designed. Applied to a realistic operational scenario, this study provides a proof-of-concept that demonstrates the instrument’s potential as a payload for future small-body exploration.| File | Dimensione | Formato | |
|---|---|---|---|
|
2026_10_Mariani_tesi.pdf
accessibile in internet per tutti
Descrizione: testo tesi
Dimensione
20.66 MB
Formato
Adobe PDF
|
20.66 MB | Adobe PDF | Visualizza/Apri |
|
2026_10_Mariani_Executive_Summary.pdf
accessibile in internet per tutti
Descrizione: testo executive summary
Dimensione
601.8 kB
Formato
Adobe PDF
|
601.8 kB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/267215