In this study, cross flow with a heated jet is analysed. The velocity ratio between heated jet and air flow is taken in different values. Air is used for both of the flows. Temperature values are measured by means of a thermocouple which is connected to a computer aided acquisition system. After experimental study, temperature distribution at the cross section of the duct is plotted. For each ratio all temperature values are recorded and mixing process is observed. Additionally, the standard deviation is calculated for each ratio.
Temperature analyses of a cross flow mixing jet
ZEREN, YUSUF EMIN
2011/2012
Abstract
In this study, cross flow with a heated jet is analysed. The velocity ratio between heated jet and air flow is taken in different values. Air is used for both of the flows. Temperature values are measured by means of a thermocouple which is connected to a computer aided acquisition system. After experimental study, temperature distribution at the cross section of the duct is plotted. For each ratio all temperature values are recorded and mixing process is observed. Additionally, the standard deviation is calculated for each ratio.File allegati
| File | Dimensione | Formato | |
|---|---|---|---|
|
Thesis_YusufEminZEREN_763077.pdf
accessibile in internet per tutti
Descrizione: Graduation Thesis of Yusuf Emin ZEREN
Dimensione
2.6 MB
Formato
Adobe PDF
|
2.6 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
Utilizza questo identificativo per citare o creare un link a questo documento:
https://hdl.handle.net/10589/68261