The object of the research will be the FluiTec milli-reactor and its ancillaries; this reactor is a novel intensified reactor that belongs to one of the key areas of Process Intensification which is Reactors Intensification. After a short introduction, the CFD simulations and the software involved will be presented. Then the experimental setup will be described. Then the first simulations done will be presented. Then the Python software used will be presented. Then the procedure followed to design the first conductivity sensors will be described. Then the new design of the sensor will be discussed with the new simulations. Finally the experiments done and the conclusions will be presented.
Dopo una breve introduzione sul progetto e l'ambito in cui si colloca, si passa a presentare gli aspetti della fluidodinamica computazionale e il programma che si è adoperato per le simulazioni. Allora si parlerà del software Python usato per gestire l'esperimento. Poi si analizzeranno le varie parti che compongono l'esperimento. Dopo si tratteranno ed esporranno le prime simulazioni fatte sui primi design pensati per il sensore di conduttività. Da qui si passerà a presentare la teoria e la procedura seguite per la progettazione dei primi sensori, con relativa calibrazione. Poi si presentarà il nuovo sensore con disegno modificato. Infine si tratteranno gli esperimenti fatti con i nuovi sensori e gli innovativi mixing elements FluiTec che sono usati anche nel Milli Reactor di interesse. Infine saranno tratte le conclusioni.
Analysis and studies of the conductivity sensor for the Fluitec Milli reactor
LUCERNONI, FEDERICO
2012/2013
Abstract
The object of the research will be the FluiTec milli-reactor and its ancillaries; this reactor is a novel intensified reactor that belongs to one of the key areas of Process Intensification which is Reactors Intensification. After a short introduction, the CFD simulations and the software involved will be presented. Then the experimental setup will be described. Then the first simulations done will be presented. Then the Python software used will be presented. Then the procedure followed to design the first conductivity sensors will be described. Then the new design of the sensor will be discussed with the new simulations. Finally the experiments done and the conclusions will be presented.File | Dimensione | Formato | |
---|---|---|---|
tesiFL.pdf
non accessibile
Descrizione: testo della tesi
Dimensione
6.67 MB
Formato
Adobe PDF
|
6.67 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/88866