In this thesis project the manufacturing techniques for 3D printing and the materials available for the realization of a scaffold for tracheal tissue engineering were analyzed; an analysis of the mechanical properties of the native tissue was carried out and on the basis of these, theoretically, materials to be used, 3D printing techniques and geometry that could be used for the production of a scaffold for a possible application as a tracheal substitute were selected. Finally, the three-dimensional model of the construct was designed with CAD software and a prototype print of a tracheal ring was made.
In questo progetto di tesi sono state analizzate le tecniche di fabbricazione, per stamapa 3D, e i materiali a disposizione per la realizzazione di uno scaffold per ingegneria tissutale tracheale; è stata fatta un'analisi delle proprietà meccaniche del tessuto nativo e sulla base di queste è sono stati selezionati in linea teorica: materiali da utilizzare, tecniche di stampa 3D e geometria utilizzabili per la produzione di uno scaffold per una possibile applicazione come sostituto tracheale. Infine è stato disegnato con software CAD il modello tridimensionale del costrutto ed è stata fatta una stampa prototipale di un anello tracheale.
Progettazione di uno scaffold per ingegneria tissutale tracheale realizzabile con 3D printing
GIACOMETTI, ELISA
2019/2020
Abstract
In this thesis project the manufacturing techniques for 3D printing and the materials available for the realization of a scaffold for tracheal tissue engineering were analyzed; an analysis of the mechanical properties of the native tissue was carried out and on the basis of these, theoretically, materials to be used, 3D printing techniques and geometry that could be used for the production of a scaffold for a possible application as a tracheal substitute were selected. Finally, the three-dimensional model of the construct was designed with CAD software and a prototype print of a tracheal ring was made.File | Dimensione | Formato | |
---|---|---|---|
2020_12_Giacometti.pdf
accessibile in internet per tutti
Descrizione: Progettazione in linea teorica di uno scaffold per ingegneria tissutale tracheale stampabile con 3D printing
Dimensione
4.03 MB
Formato
Adobe PDF
|
4.03 MB | Adobe PDF | Visualizza/Apri |
I documenti in POLITesi sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
https://hdl.handle.net/10589/171128